Characteristics

Type:
compression, tension, tension/compression
Form:
button type
Other characteristics:
stainless steel, strain gauge

Rated force:
Min.: 5 kN
Max.: 5000 kN

Description

This line of load cells and dynamometers is designed on the principle that a force applied on the device produces voltages which are in direct proportion to the stress on the cell. This voltage is converted into an electrical signal using a strain gauge. The maker offers assorted load cells in response to the wide field of applications. These may be classified briefly as compression cells, traction cells, cell-way, off-center and so on.

All these feature laser welding to assure that the internal parts are protected fully from the environmental stresses, and to prolong the service life of the product. The compression load cells are used in situations where the load is applied in only one direction of compression, as in weighing silos or motor vehicle weighing platforms. These include the popular F1 cells that are in widespread use in many industrial applications, and are unidirectional bending load cells. Dynamometers are used in overhead cranes and hoppers, while tractive cells are used where there is tractional force only. Bidirectional cells handle both compressive and tractive forces.

These cells take a nominal load of 5kN up to 5mN, producing an output signal of 2mV/V. They are made of laser-welded stainless steel and can tolerate temperatures up to 70 degrees Celsius, conforming to IP67.

Level controls

The level of compound liquids and solids (such as powders, mixtures, granulates, etc.) contained in containers, tanks, silos, etc. is measured by height in metres. Level sensors are proposed for each type of material.
In the case of liquids, the level or height indicated is always the effective average real height of the liquid content, while in the case of solids the level or height indicated is the effective precise real height of the solid content; a height basically depends on the measuring point.

Level controls

The level of compound liquids and solids (such as powders, mixtures, granulates, etc.) contained in containers, tanks, silos, etc. is measured by height in metres. Level sensors are proposed for each type of material.
In the case of liquids, the level or height indicated is always the effective average real height of the liquid content, while in the case of solids the level or height indicated is the effective precise real height of the solid content; a height basically depends on the measuring point.

i

- là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp,.... Bên cạnh đó chúng tôi là nhà thực hiện các giải pháp tích hợp trong công nghiêp, dân dụng, xây dựng,... Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa hiện nay

Liên hệ cho chúng tôi để CÓ thông tin mà Quý khách CẦN.

[ Email ] | |
Online contact========

Yahoo: nhan.luongthe
Skype: luongthenhan
===================

Greentech Trading Service Company Limited

[ Main Office ] 104/15 Street 18, Binh Hung Hoa Ward, Binh Tan Dist, HCMC, Viet Nam

[ Brand Office ] 92/8 Huynh Thuc Khang Street, Tam Ky City, Quang Nam Province, Viet Nam

[ Tel & Fax ] + 84 (0) 8 3620 4585
[ Website ] |

[ Face Page ]

-------------------------------

Ø Flow, pressure and level measurement | Temperature and humidity measurement | Position measurement | Force measurement

Ø Optical and acoustic measurement | Electrical measurement | Hydraulics – Pneumatic

Ø Valve - Pipes, tubes and fittings