HEPA Filter HC MultiQube
As was the case with the Trotec micro-filters, the MultiQube HEPA HC filter was designed and developed especially for use with WA water separators and VE compressors as part of the Trotec filter chain.
The MultiQube HEPA filter system comprises two modules: the robust filter housing in the form of a service-friendly two-part chassis made of synthetic material with two practical quick-action couplings and a filter element that has to be replaced when it comes to the end of its product life. A second filter element is included in the scope of delivery.
Trotec HEPA filter elements comply with the requirements for filter class H13 filters in compliance with DIN EN 1822-1 and can achieve a degree of separation of nominal > 99.97 % for particles up to a size of 0.3 micrometres!
And with a filter surface of 3 m² and a nominal air throughput of 250 m³/h the HEPA filter elements are perfectly matched to the technical specifications of the VE compressors’ vacuum turbines and have performance reserves for combined operation with up to two VE 4 MultiQubes or one single VE 6.
Even more safety and active contamination protection thanks to HepaControl
Contaminated HEPA filters do not only pose a real threat because they can contaminate the surrounding air, they also prolong drying times and can cause compressor turbines to overheat !
The new HEPA HC filter with its innovative HepaControl status display provides more safety and active contamination protection than passive HEPA filter systems :
When the filter elements are worn out and the filter efficiency is subsequently too low, the HepaControl warning lamp lights up and warns the user that the filter element needs to be replaced.
HepaControl does not require an additional power supply, because the bright LED warning light is powered by a strong, integrated long life high battery.