Characteristics

Fluid:
for liquids
Technology:
turbine
Other characteristics:
flange, IP65

Process pressure:
400 bar (5801.51 psi)
Process temperature:
Min.: -196 °C (-320.8 °F)
Max.: 350 °C (662 °F)
Volumetric flow rate:
Min.: 0 l/min (0 us gal/min)
Max.: 25000 l/min (6604.3 us gal/min)

Description

HM-TCR turbine flow meters serve to accurate measurement of continuous and discontinuous flow rate values. This turbine flow meter is most suited for liquids with low and middle viscosity, such as for example water, emulsions, mixtures containing glycol and light oils. The large range of different pipe connections and structural sizes allows using these flow meters in various applications and in various industrial sectors.

Applications:
• Tap and demineralised water
• Fuels
• Liquefied gases
• Pharmaceutical liquids
• Fuel oil
• Solvents

Features:
• Short response time (> 50 ms)
• Dynamic measuring system
• Temperature: -196°C to +350°C
• Several nominal sizes
• Pressure: up to 400 bar/6,000 psi
• DIN and ASME flanges available as standard (further flanges on request)

Level controls

The level of compound liquids and solids (such as powders, mixtures, granulates, etc.) contained in containers, tanks, silos, etc. is measured by height in metres. Level sensors are proposed for each type of material.
In the case of liquids, the level or height indicated is always the effective average real height of the liquid content, while in the case of solids the level or height indicated is the effective precise real height of the solid content; a height basically depends on the measuring point.

Level controls

The level of compound liquids and solids (such as powders, mixtures, granulates, etc.) contained in containers, tanks, silos, etc. is measured by height in metres. Level sensors are proposed for each type of material.
In the case of liquids, the level or height indicated is always the effective average real height of the liquid content, while in the case of solids the level or height indicated is the effective precise real height of the solid content; a height basically depends on the measuring point.

i

- là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp,.... Bên cạnh đó chúng tôi là nhà thực hiện các giải pháp tích hợp trong công nghiêp, dân dụng, xây dựng,... Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa hiện nay

Liên hệ cho chúng tôi để CÓ thông tin mà Quý khách CẦN.

[ Email ] | |
Online contact========

Yahoo: nhan.luongthe
Skype: luongthenhan
===================

Greentech Trading Service Company Limited

[ Main Office ] 104/15 Street 18, Binh Hung Hoa Ward, Binh Tan Dist, HCMC, Viet Nam

[ Brand Office ] 92/8 Huynh Thuc Khang Street, Tam Ky City, Quang Nam Province, Viet Nam

[ Tel & Fax ] + 84 (0) 8 3620 4585
[ Website ] |

[ Face Page ]

-------------------------------

Ø Flow, pressure and level measurement | Temperature and humidity measurement | Position measurement | Force measurement

Ø Optical and acoustic measurement | Electrical measurement | Hydraulics – Pneumatic

Ø Valve - Pipes, tubes and fittings