LD6000 PTS + SR-20 SeekTech + ST-510 | Trotec | PitescoVietNam

(1 đánh giá)

Mã SP: LD6000 PTS
Vui lòng gọi

Xuất xứ :TROTEC

Nơi rao bán :Toàn quốc

Tình trạng :Mới 100%

Ngày cập nhật :19-05-2018 09:48:14

Bảo hành :12 tháng

Acoustic Tube Probe LD6000 PTS + SR-20 SeekTech + ST-510 SeekTech Transmitter Product number KIT0001408



D5 (Khu dân cư Miếu nổi) Đinh Tiên Hoàng, Phường 3, Q.Bình Thạnh, TP HCM

08 3517 6474



Ghi chú: GianHangVN không trực tiếp bán sản phẩm, vui lòng liên hệ trực tiếp với người bán bên trên.
PITESCO Việt Nam - Công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng xu hướng công nghiệp hóa, hiện đại hóa.

       Liên hệ cho chúng tôi theo số 0962.563.542 để  thông tin mà Quý khách CẦN.    

Email : toan@pitesco.com
Yahoo: haitoan.pitesco
Skype: haitoan.pitesco
Acoustic Tube Probe LD6000 PTS + SR-20 + ST-510

Finally, using the acoustic tube probe LD6000 PTS, pipe bursts can quickly and easily be detected on the side of the house connection, too!
The remediation of damage after pipe bursts requires a definite clarification of the responsible cost centre.

Has the damage occurred on the terrain of the building's proprietor or on the side of the water supply network?

If to this end one would like to carry out an above-ground acoustic leak detection to locate the damage, the pipeline course must be perfectly clear, which is hardly ever the case. And, so far, pinpoint locating directly in the house connection line has not been possible without further ado.

Finally, using the acoustic tube probe LD6000 PTS, pipe bursts can quickly and easily be detected on the side of the house connection, too!

The ingenious combination of compact, bendable pig probe with integrated precision microphone and contactable probe cable enables the acoustic detection of the point of leakage including locating function.

According to regulations, probe and push cable of the LD6000 PTS can be disinfected and directly channelled into the pressurized water line on the house connection side.

Flexible application and combination possibilities

Unaffected by ambient sounds, the precision microphone of the LD6000 PTS captures even extremely silent noises inside the pipe, which are wirelessly conveyed to the supplied headphones via the Bluetooth transmitter.

Experienced measurement engineers can thus unerringly identify the leaking sound and then determine the position of the leak by use of the metre counter.

Should further a combination detector LD6000 be available, frequencies can additionally be visualized and potential points of leakage can be indicated in form of a bar graph. Moreover, the application of an LD6000 enables the data recording of long-term measurements.

Furthermore, a frequency generator can be connected to the LD6000 PTS to contact the entire push cable or the probe tip. Then the course of the pipeline or the point of leakage can be detected using a receiver. (Well suited for that: SeekTech pipe detector SR20 & SeekTeck transmitter Sender ST510)

A variety of mounting options of the push cable pressure lock for flexible insertion via:
  • Domestic water meter
  • Free-flow valve
  • Dismantled piping
  • Tapping saddle
  • Hydrants

A few practical benefits:
  • Pinpoint acoustic leak detection directly in the pressurized water line
  • Enables the pinpoint location of the probe tip and route location of the push cable for plastic pipe course detection
  • No manipulation by environmental sounds
  • Wireless sound transmission via Bluetooth
  • Integrated metre counter

Technical data:

  • Material: Zinc plated tubular steel frame with aluminium reel
  • Dimensions: 570 x 400 x 160 mm
  • Weight: 7 kg

  • Type: highly flexible sensor head for pinpoint or route location (33 kHz)
  • Bending radius: min. 30 mm
  • Frequency range: 100 to 10,000 Hz

Push cable
  • Type: Polykat glass fibre with integrated stranded copper wires (breaking load 10.3 kN)
  • Diameter: 4.5 mm
  • Length: 50 m (other lengths available on request)

Disinfecting equipment
  • Type: Cable passage with storage container for continuous disinfection of the glass fibre when feeding
  • Pressure resistance: max. 16 Bar

  • Type: Bluetooth 2.0
  • Reach: 10 m
  • Power supply: 9 V IEC 6LR61

  • Bluetooth headset

Scope of delivery

Bluetooth headset, disinfectant, cable port, GEKA couplings, 1 inch IG and 1 inch AG, USB recharger cable for headset, motor vehicle charging adapter, 1 pair of protective gloves, accessory case

Optional accessories: LD6000 PTS Bluetooth receiver

SR-20 SeekTech

Thanks to the extremely low weight and effective power management, even longer measurement operations can be carried out effectively without fatigue and in one session.

The high processor performance of the system combined with advanced antenna technology and the user-friendly cartographic information display enable the rapid, precise and reliable localisation of underground supply lines.

Innovative technology for effective measurement operations

The device’s 3D-antenna system enables both inductive and passive localisation of pipes and cables from any position and direction, independent of the user’s location.

Simple to operate, simple to learn…

You can check at any time whether or not you are still located over the target line by means of the continual display of depth and current and the selectable acoustic ­distance signal.

The search result can be reliably verified via the easily understandable cartographic display which shows direction arrows, signal strength and proximity signal.

With the SR-20, you can carry out the most difficult localisations and mark supply lines reliably; even branch lines from other directions – and even lines whose existence was previously completely unknown to you!

Standard equipment SR-20:

SR-20 detector, markers and mast holders, batteries, operating manual

Optional equipment:

Additional probe markers, ST-33Q trans­mitter, ST-510 trans­mitter, ST-305 transmitter, induction clamp, separate transmitter, floating transmitter

Technical data: Localisation frequencies
  • Active mode: 128 Hz, 1 kHz, 8 kHz, 33 kHz
  • Passive mode: Current: 50/60 Hz, Radio: 4 - 15 kHz and 15 - 36 kHz
  • Probe mode: 16 Hz, 512 Hz, 640 Hz, 16 kHz, 33 kHz
  • all modes: individually selectable user-defined frequencies up to 35 kHz

  • Power supply: Four alkaline batteries or NiCad rechargeable batteries (type C)
  • Operating time: approx. 12 to 24 hours, depending on usage
  • Weight without batteries / with batteries: 1,500 g / 1,800 g
  • Dimensions L x W x H: 284 x 1,300 x 790 mm

ST-510 SeekTech Transmitter

Where required, the cable can be extended with two 15 m long attachments. The ST-510 has an inductance-dependent acoustic signal, a power-saving function with auto shutdown and an LCD display with automatic backlight to display line resistance, current flow and performance.

Further features:
  • 10 watts variable performance
  • 27 frequencies (128 Hz, 1 kHz, 8 kHz, 33 kHz, 93 kHz and many more)
  • LCD monitor provides immediate visual information on cable ­resistance, current and ­performance
  • Ground stake included in scope of delivery
  • 4 m feed cable
  • 8 D batteries
  • can be connected to 230 V
Bình chọn sản phẩm:



D5 (Khu dân cư Miếu nổi) Đinh Tiên Hoàng, Phường 3, Q.Bình Thạnh, TP HCM



08 3517 6474

Sản phẩm xem thêm