D445 precision in a modern, dependable design:

  • Temperature range: ambient to 100 °C (15 °C to 150 °C with available bath options)
  • Viscosity range: 0.5 mm²/s (cSt) to 10,000 mm²/s (cSt) in 100-fold increments* (easily covering the range of 5 separate manual glass viscometers)
  • Dual, independent baths enable simultaneous testing at two different temperatures
  • Two fully accessible, 14-position sample handlers ensure reliable, unattended processing of up to 24 determinations per hour
  • Automation provides an alternative to labor-intensive manual testing and reduces operator to operator variability
  • A well tested CANNON viscometer platform offers reliability and dependable support

SPECIFICATIONS

UNIT WEIGHT 63.0 kg (140.0 lb)
METHOD ASTM D445/D446, IP 71, ISO 3104/3105, SAE J300
DIMENSIONS (W X D X H) 36.0 cm × 66.0 cm × 72.0 cm (14.3 in × 26.0 in × 28.5 in)
SHIPPING DIMENSIONS (W X D X H) 81.3 cm × 53.3 cm × 99.0 cm (32.0 in × 21.0 in × 39.0 in)
SHIPPING WEIGHT (WITH ALL ITEMS) 96.6 kg (213.0 lb)
MAXIMUM THROUGHPUT 24 tests per hour
SAMPLE CAPACITY 28 positions (2 x 14 positions), automated
VISCOSITY RANGE 0.5 mm²/s (cSt) to 10,000 mm²/s (cSt) in 100-fold increments (depending on viscometer tube selection). Fast run tubes are also available.
TIMING RESOLUTION 0.01 s (timing accuracy to ± 0.001 s)
TEMPERATURE RANGE AND ACCURACY

15 °C to 100 °C,± 0.01 °C (temperatures within 5 °C of ambient and below require bath cooling)
Up to 150 °C,± 0.03 °C (with high temperature bath

MINIMUM SAMPLE/SOLVENT VOLUME 8 mL sample (as little as 3 mL with fast run tubes)/15 mL solvent per test
OPERATING CONDITIONS 15 °C to 30 °C, 10% to 75% relative humidity (non-condensing),Installation Category II; Pollution Degree 2
ELECTRICAL SPECIFICATIONS 100 Vac, 50/60 Hz; 115 Vac, 50/60 Hz; 230 Vac, 50/60 Hz; 1200 watts power consumption
COMPLIANCE CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC); HI-POT (1900 Vdc,60 sec.); ROHS
ADDITIONAL STANDARD FEATURES Internal heated waste drain lines,dual solvent input
DATA OUTPUT USB