Characteristics

Technology:
float
Medium:
for liquids
Other characteristics:
IP65

Process pressure:
Min.: 0 bar (0 psi)
Max.: 10 bar (145.04 psi)
Process temperature:
Min.: -20 °C (-4 °F)
Max.: 120 °C (248 °F)

Description

The level switch float dipping available with 1 control points can be used for dirty liquids, water, petroleum, oils, coolants. It tolerates the presence of ferrous metal particles because the float magnet holder and it is integral with the rod.
It provides a total security determined by the fact that the electrical part is totally separated in the side of the tank and it is perfectly sealed with respect to the outer side by means of ultrasonic welding and resin of the pin.

The body is glass-filled nylon, sturdy and durable under the mechanical aspect in terms of chemical and ideal as insulating container of reed contacts.
A single float can operate a single Reed (min. or max. Level), or two Reed (min. and empty or max. Extra and max. Layer) satisfying the most demanding requirements.

Rapid Level switches are available as standard with a length of 500 mm and 1000 mm (to obtain controlling stakes in their respective ranges).
You can get the desired length by simply cutting the steel rod with a simple pipe cutter or you can vary the point of intervention by applying a float with through hole that allows whenever there is a need to modify the control point of the desired liquid.
They may be required already arranged for the control of predetermined dimensions.

Advantages
Insensitive to dirt
You can get the desired length by cutting the steel rod

Level controls

The level of compound liquids and solids (such as powders, mixtures, granulates, etc.) contained in containers, tanks, silos, etc. is measured by height in metres. Level sensors are proposed for each type of material.
In the case of liquids, the level or height indicated is always the effective average real height of the liquid content, while in the case of solids the level or height indicated is the effective precise real height of the solid content; a height basically depends on the measuring point.

Level controls

The level of compound liquids and solids (such as powders, mixtures, granulates, etc.) contained in containers, tanks, silos, etc. is measured by height in metres. Level sensors are proposed for each type of material.
In the case of liquids, the level or height indicated is always the effective average real height of the liquid content, while in the case of solids the level or height indicated is the effective precise real height of the solid content; a height basically depends on the measuring point.

i

- là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp,.... Bên cạnh đó chúng tôi là nhà thực hiện các giải pháp tích hợp trong công nghiêp, dân dụng, xây dựng,... Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa hiện nay

Liên hệ cho chúng tôi để CÓ thông tin mà Quý khách CẦN.

[ Email ] | |
Online contact========

Yahoo: nhan.luongthe
Skype: luongthenhan
===================

Greentech Trading Service Company Limited

[ Main Office ] 104/15 Street 18, Binh Hung Hoa Ward, Binh Tan Dist, HCMC, Viet Nam

[ Brand Office ] 92/8 Huynh Thuc Khang Street, Tam Ky City, Quang Nam Province, Viet Nam

[ Tel & Fax ] + 84 (0) 8 3620 4585
[ Website ] |

[ Face Page ]

-------------------------------

Ø Flow, pressure and level measurement | Temperature and humidity measurement | Position measurement | Force measurement

Ø Optical and acoustic measurement | Electrical measurement | Hydraulics – Pneumatic

Ø Valve - Pipes, tubes and fittings