| AbsoluteLIMAX Shaft Information Systems Absolute measurement of the car position For hoisting heights up to 130 m | Speeds up to 4 m/s Absolute measurement of the car position For hoisting heights up to 260 m | Speeds up to 10 m/s Absolute, redundant measurement of the car position For hoisting heights up to 260 m | Speeds up to 10 m/s LIMAX SAFE Shaft Information and Safety System Absolute, redundant recording of the car position. For hoisting heights up to 260 m | Speeds up to 10 m/s Absolute, redundant recording of the car position for the highest buildings. For hoisting heights up to 1,500 m | Speeds up to 18 m/s Electronic evaluation unit in which safety-relevant switching and control functions are implemented Modular system consisting of the LIMAX33 RED sensor and the SAFE BOX. For hoisting heights up to 260 m | Speeds up to 10 m/s Modular system consisting of the LIMAX44 RED sensor and the SAFE BOX For hoisting heights up to 1,500 m | Speeds up to 18 m/s Shaft information system based on the LIMAX33 RED sensor for safe position detection. The safety-related switching and control functions are integrated in the sensor housing. For hoisting heights up to 260 m | Speeds up to 10 m/s | Absolute For industrial applications with a resolution of 1 mm and measuring lengths up to 1000 meters Autoreferencing, absolute measuring system with a resolution of 1 mm and measuring lengths up to 1000 meters Incremental For angular and linear measurements, with 0.1 mm (0.025 mm) resolution. Suitable for long distances, with 2.5 mm resolution. 1.0 mm resolution, up to 10 mm distance between sensor and magnetic tape possible. Low-cost length and angle measuring system, with 0.1 mm (0.025 mm) resolution. Round sensor with 0.1 mm (0.025 mm) resolution. | Absolute Absolute, contactless measuring. With LED and SSI error bit if the distance between sensor and tape gets too large. Resolution 0.01 mm, for measuring lengths up to 20 meters. Magnetic absolute length measuring system for highly dynamic controls Absolute, guided measuring. Resolution 0,01 mm. Incremental Ideal for angular and linear measurements, with 0.01 mm resolution. High Precision Length Measuring System with selectable resolution up to 0.001 mm (1 µm). High precision length measuring system with selectable resolution up to 0,025 mm (2,5 µm). Precision carriage for incremental measurements with pre-installed, selectable measuring system. With speed monitoring and 5 adjustable resolutions. Guided Length Measuring System with a mechanical cylinder with resolutions from 0,1 mm to 0,001 mm. Magnetic-based Length Measuring System with sin/cos signal output. Magnetic-based Length Measuring System with integrated Push-Pull signals for MIN/MAX-limit switches. Guided Measuring System for use in press brakes with a resolution of up to 0,00122 mm. | Absolute Magnetic absolute encoder. High resolution: 16,000 mesauring steps/rev. Single-Turn-Encoder. Resolution of 12 bit over the whole measuring distance. Single Axis Absolute Inclinometer. Measuring range 0° to 90° with analog output 0,5 - 4,5 V. 3 Axes Absolute Inclinometer with high resolution. Measuring range 0° to 90° +/- with 0,025° resolution. Incremental Suited for rotative angular measurement. Wearfree due to contactless measuring principle. Up to 10 000 revolutions/minute. Space-saving and reasonably priced option to rotary encoders. Insensitive against environmental influences. Can be used with all standard incremental ELGO sensors. Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, robust design, IP64. Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, IP54. Incremental Encoder up to 500 pulses/revolution, with 10 mm steel shaft, IP54. Incremental Encoder up to 1000 pulses/revolution, with 12 mm steel shaft, IP66 Hollow Shaft in miniature structural shape, IP54 |
