FURTIF 7SSR24V | Comitronic FURTIF 7SSR24V | Công tắc cảm ứng | Touch switch

CHARACTERISTICS

Type: touch
Number of poles: single-pole
Other characteristics: stand-alone, electromechanical, coded safety, contactless
Protection level: IP67
Current: 100 mA
Voltage: 24 V

DESCRIPTION

The non contact coded safety switches can be used alone. The power supply requires a voltage of 24V AC/DC –15% / +10%, 50/60 Hz with current consumption of 45 mA/DC, 50 mA/AC. This device is used with a temperature of -20°C to +60°C and a maximum switching frequency of 2 Hz.

AMX - Safety Switch stand alone

Controls the position of hazardous machine doors/cases with integrated self-checking

Contactless coded sensor with electronic technology and relays
IP68 PA6 / IP69K INOX316L
Performance level and category without external controller: Cat 3 PL=d according to ISO 13849-1
Performance level and category with AWAX controller: Cat 4 up to PL=e
Integrated safety level: SIL 2 according to IEC 61508

AMXR-S - Safety Switch stand alone with RFID coding

Controls the position of safety doors/casings with RFID encoding

RFID sensor with 16 million codes
Category 3 total security management without an external controller
Programmable code through auto-learning (no software or PC)
Level of performance with AWAX controller: up to PL = e
Safety category without an external controller: 3 (EN 954-1)
Cycle after dangerous failure: B10d = 2000000 at 2 Amps

XR530 - Badge access control reader with RFID coding

Card access control with RFID encoding

RFID sensor with 16 million codes
Lock control and two alarm levels
Programmable code through auto-learning (no software or PC)

AMX5CK - Safety Switch with person management in hazardous area

Position control for doors / casings on hazardous machinery
Manages person entry in hazard zones using an electrical locking key

Contactless encoded electronic sensor with relay
Category 3 total safety management without an external controller
Electrical locking key with position contact

MASSIMOTTO X5 - Safety Switch for single or double-wing doors

Position control for doors / casings on hazardous machinery

Contactless encoded electronic sensor with relay
Category 3 total safety management without an external controller
Suitable for groove profiles and single or double doors

OPTO2S - Miniature safety Switch

Position control for doors / casings on hazardous machinery

Contactless encoded electronic sensor with relay
Category 3 total safety management without an external controller
12V version for embedded applications

SSR - Safety Switch stand alone - Cat.1

Position control for doors / casings on hazardous machinery

Contactless encoded electronic sensor with relay
Up to 8 zone differentiation codes
Safety contacts 2A / 250V
Level of performance without an external controller: PL = c
Level of performance with AWAX controller: up to PL = e

VILGIL RS - Category 4 autonomous contactless safety switch

MORE INFORMATION ABOUT: SAFETY SWITCH STAND ALONE

A revolutionary safety sensor:
1) Benefits of PA6 housing: weather resistance, chemical attack
- Very good heat resistance
- Very good resistance to cold
- Very good resistance to chemicals and hydrocarbons
- Protection IP 67/68
- LED indicator for translucent area for total protection
- Mounting brackets for double-legged for detection // or perpendicular to the ground
2) Benefits INOX316L housing and mirror finish:
- Special food
- Severe Environment
- No bacterial adherence
- Easy cleaning
- IP 69K
- LED indicator with protective cover
- Mounting brackets for double-legged for detection // or perpendicular to the ground
3) Technological advantages:
- Suitable for doors / sliding or rotating housings
- No mechanical contact between the transmitter (key) and receiver (sensor)
- Large lateral alignment tolerance, axial, broad functional play (for guided poorly doors)
- Protection against fraud inviolable encoding magnetic field
- Output Cable UL2464 or PUR cable 50cm sturdy molded M12 UL20549
- Switching to failure cycle: B10d = 2 000 000 2A (adapted to the contactor control)
- Standalone Product with Performance Level PL d / cat.3 without adding housing / additional PLC
- Number of sensor in series: up to 100
- Signalling: by led and independent auxiliary output (status of each door told a serialization)
- Safety output: 2 lines redundant dry contacts 2A / 48V
- Auxiliary output: 1 contact PNP 250mA (sending voltage door open)
Choose AMX is choosing a technology solution twice
less expensive. It is simple, quickly mounts, robust,
autonomous and polyvalent

AMX - Safety Switch stand alone

Controls the position of hazardous machine doors/cases with integrated self-checking

Contactless coded sensor with electronic technology and relays
IP68 PA6 / IP69K INOX316L
Performance level and category without external controller: Cat 3 PL=d according to ISO 13849-1
Performance level and category with AWAX controller: Cat 4 up to PL=e
Integrated safety level: SIL 2 according to IEC 61508

AMXR-S - Safety Switch stand alone with RFID coding

Controls the position of safety doors/casings with RFID encoding

RFID sensor with 16 million codes
Category 3 total security management without an external controller
Programmable code through auto-learning (no software or PC)
Level of performance with AWAX controller: up to PL = e
Safety category without an external controller: 3 (EN 954-1)
Cycle after dangerous failure: B10d = 2000000 at 2 Amps

XR530 - Badge access control reader with RFID coding

Card access control with RFID encoding

RFID sensor with 16 million codes
Lock control and two alarm levels
Programmable code through auto-learning (no software or PC)

AMX5CK - Safety Switch with person management in hazardous area

Position control for doors / casings on hazardous machinery
Manages person entry in hazard zones using an electrical locking key

Contactless encoded electronic sensor with relay
Category 3 total safety management without an external controller
Electrical locking key with position contact

MASSIMOTTO X5 - Safety Switch for single or double-wing doors

Position control for doors / casings on hazardous machinery

Contactless encoded electronic sensor with relay
Category 3 total safety management without an external controller
Suitable for groove profiles and single or double doors

OPTO2S - Miniature safety Switch

Position control for doors / casings on hazardous machinery

Contactless encoded electronic sensor with relay
Category 3 total safety management without an external controller
12V version for embedded applications

SSR - Safety Switch stand alone - Cat.1

Position control for doors / casings on hazardous machinery

Contactless encoded electronic sensor with relay
Up to 8 zone differentiation codes
Safety contacts 2A / 250V
Level of performance without an external controller: PL = c
Level of performance with AWAX controller: up to PL = e

VILGIL RS - Category 4 autonomous contactless safety switch

MORE INFORMATION ABOUT: SAFETY SWITCH STAND ALONE

A revolutionary safety sensor:
1) Benefits of PA6 housing: weather resistance, chemical attack
- Very good heat resistance
- Very good resistance to cold
- Very good resistance to chemicals and hydrocarbons
- Protection IP 67/68
- LED indicator for translucent area for total protection
- Mounting brackets for double-legged for detection // or perpendicular to the ground
2) Benefits INOX316L housing and mirror finish:
- Special food
- Severe Environment
- No bacterial adherence
- Easy cleaning
- IP 69K
- LED indicator with protective cover
- Mounting brackets for double-legged for detection // or perpendicular to the ground
3) Technological advantages:
- Suitable for doors / sliding or rotating housings
- No mechanical contact between the transmitter (key) and receiver (sensor)
- Large lateral alignment tolerance, axial, broad functional play (for guided poorly doors)
- Protection against fraud inviolable encoding magnetic field
- Output Cable UL2464 or PUR cable 50cm sturdy molded M12 UL20549
- Switching to failure cycle: B10d = 2 000 000 2A (adapted to the contactor control)
- Standalone Product with Performance Level PL d / cat.3 without adding housing / additional PLC
- Number of sensor in series: up to 100
- Signalling: by led and independent auxiliary output (status of each door told a serialization)
- Safety output: 2 lines redundant dry contacts 2A / 48V
- Auxiliary output: 1 contact PNP 250mA (sending voltage door open)
Choose AMX is choosing a technology solution twice
less expensive. It is simple, quickly mounts, robust,
autonomous and polyvalent

GREENTECH Việt Nam - Công ty TNHH TM DV GREENTECH là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp,.... Bên cạnh đó chúng tôi là nhà thực hiện các giải pháp tích hợp trong công nghiêp, dân dụng, xây dựng,... Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa hiện nay

Liên hệ cho chúng tôi để CÓ thông tin mà Quý khách CẦN.

[ Email ] nhan@greentechvn.com | sales@greentechvn.com | ltnhan.gh@gmail.com
Online contact========

Yahoo: nhan.luongthe
Skype: luongthenhan
===================

Greentech Trading Service Company Limited

[ Main Office ] 33 Street DC5, Son Ky Ward, Tan Phu District, HCM City, Vietnam

[ Branch Office ] 92/8 Huynh Thuc Khang Street, Tam Ky City, Quang Nam Province, Viet Nam

[ Tel & Fax ] + 84 (0) 28 3816 1314
[ Website ] http://greentechvn.com | http://greentechvn.net

[ Face Page ] https://www.facebook.com/greentechvietnam/

-------------------------------

Ø Flow, pressure and level measurement | Temperature and humidity measurement | Position measurement | Force measurement

Ø Optical and acoustic measurement | Electrical measurement | Hydraulics – Pneumatic

Ø Valve - Pipes, tubes and fittings