Giá bán : Vui lòng gọi
Thông tin người bán
Công ty TNHH Thương mại dịch vụ GREENTECH
33 Đường DC5, Phường Sơn Kỳ, Quận Tân Phú, Tp.HCM
Hotline: 0935 04 1313
Email: sales@greentechvn.com
CHI TIẾT
Magnetic measuring system for piston rod profiles
THÔNG SỐ KỸ THUẬT
| Shaft Information Systems for the lift industry | Magnetic length and angle measuring systems up to 1/10 resolution | Magnetic length and angle measuring systems up to 1/1000 resolution | Rotative measuring systems |
| AbsoluteLIMAX Shaft Information Systems Absolute measurement of the car position For hoisting heights up to 130 m | Speeds up to 4 m/s Absolute measurement of the car position For hoisting heights up to 260 m | Speeds up to 10 m/s Absolute, redundant measurement of the car position For hoisting heights up to 260 m | Speeds up to 10 m/s LIMAX SAFE Shaft Information and Safety System Absolute, redundant recording of the car position. For hoisting heights up to 260 m | Speeds up to 10 m/s Absolute, redundant recording of the car position for the highest buildings. For hoisting heights up to 1,500 m | Speeds up to 18 m/s Electronic evaluation unit in which safety-relevant switching and control functions are implemented Modular system consisting of the LIMAX33 RED sensor and the SAFE BOX. For hoisting heights up to 260 m | Speeds up to 10 m/s Modular system consisting of the LIMAX44 RED sensor and the SAFE BOX For hoisting heights up to 1,500 m | Speeds up to 18 m/s Shaft information system based on the LIMAX33 RED sensor for safe position detection. The safety-related switching and control functions are integrated in the sensor housing. For hoisting heights up to 260 m | Speeds up to 10 m/s | Absolute For industrial applications with a resolution of 1 mm and measuring lengths up to 1000 meters Autoreferencing, absolute measuring system with a resolution of 1 mm and measuring lengths up to 1000 meters Incremental For angular and linear measurements, with 0.1 mm (0.025 mm) resolution. Suitable for long distances, with 2.5 mm resolution. 1.0 mm resolution, up to 10 mm distance between sensor and magnetic tape possible. Low-cost length and angle measuring system, with 0.1 mm (0.025 mm) resolution. Round sensor with 0.1 mm (0.025 mm) resolution. | Absolute Absolute, contactless measuring. With LED and SSI error bit if the distance between sensor and tape gets too large. Resolution 0.01 mm, for measuring lengths up to 20 meters. Magnetic absolute length measuring system for highly dynamic controls Absolute, guided measuring. Resolution 0,01 mm. Incremental Ideal for angular and linear measurements, with 0.01 mm resolution. High Precision Length Measuring System with selectable resolution up to 0.001 mm (1 µm). High precision length measuring system with selectable resolution up to 0,025 mm (2,5 µm). Precision carriage for incremental measurements with pre-installed, selectable measuring system. With speed monitoring and 5 adjustable resolutions. Guided Length Measuring System with a mechanical cylinder with resolutions from 0,1 mm to 0,001 mm. Magnetic-based Length Measuring System with sin/cos signal output. Magnetic-based Length Measuring System with integrated Push-Pull signals for MIN/MAX-limit switches. Guided Measuring System for use in press brakes with a resolution of up to 0,00122 mm. | Absolute Magnetic absolute encoder. High resolution: 16,000 mesauring steps/rev. Single-Turn-Encoder. Resolution of 12 bit over the whole measuring distance. Single Axis Absolute Inclinometer. Measuring range 0° to 90° with analog output 0,5 - 4,5 V. 3 Axes Absolute Inclinometer with high resolution. Measuring range 0° to 90° +/- with 0,025° resolution. Incremental Suited for rotative angular measurement. Wearfree due to contactless measuring principle. Up to 10 000 revolutions/minute. Space-saving and reasonably priced option to rotary encoders. Insensitive against environmental influences. Can be used with all standard incremental ELGO sensors. Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, robust design, IP64. Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, IP54. Incremental Encoder up to 500 pulses/revolution, with 10 mm steel shaft, IP54. Incremental Encoder up to 1000 pulses/revolution, with 12 mm steel shaft, IP66 Hollow Shaft in miniature structural shape, IP54 |
| Inclinometers |
| AbsoluteSingle axis absolute inclinometer: +/- 90°with Analogue output 0.5 - 4.5 V High resolution 3 axisabsolute inclinometer:+/-90°, +/-90° / +/-180°with 0,025° resolution |
| 1-axis mini position indicator 24 VDC 1-axis universal position indicator 1-3-axis position indicator | LED position indicator with two pre-selections and relay outputs Universal position indicator for incremental and absloute measuring systems with relay outputs and integrated RS-232-interface |
| For incremental measurementsSmalest design with integrated or external battery. Battery-powered position indicator for length and angle measurement with resolution up to 0.01 mm Battery powered position indicator with 7-digit LCD-display, a resolution up to 0.01 mm and "°"-symbol. Option: RS232-interface. Battery-powered position indicator with an external sensor and 868 MHz radio transmission. Battery-powered measuring and indicating system with large two-line LCD-display. Electrical battery-powered handwheel with 20 mm hollow shaft, directly attachable to spindle. | For absolute measurements Battery-powered absolute mini position indicator Battery-powered absolute measuring and indicating system with external pluggable sensor Battery-powered absolute 3-axis position indicator Battery-powered absolute measuring system with integrated sensor on the back side of the indicating device. Battery-powered absolute measuring and indicating system with large two-line LCD display |
| Single Axis Compact single axis controller. The P40 is predestined for easy positioning applications. A single axis controller without program memory.Suitable for simple positioning applications. P8721 is a single axis controller with program memory. The program memory allows the processing of up to 200 address lines (proratable into blocks). Single axis controller with an extensive parameter menu. P9521 with additional program memory. | Multiple Axes for sheet metal shears. Intuitive interface and menu navigation, for the complete control of the cutting process. Compact 2 axes controller.The P40 is predestined for easy positioning applications. Low-Cost-Terminal with positioning functions up to 6 axes. This robust and compact controller can be used in a wide range of applications. Touch screen terminal on the basis of the IPC which is characterized by an optimal price-performance ratio and easy handling. P8822 is a 2 axes controller which is easy in handling and enables a fast parameterization |
| SensorsFor Lift
Installation kit for the quick and easy installation of the magnetic tape in the elevator shaft.
General |
| Shaft Information Systems for the lift industry | Magnetic length and angle measuring systems up to 1/10 resolution | Magnetic length and angle measuring systems up to 1/1000 resolution | Rotative measuring systems |
| AbsoluteLIMAX Shaft Information Systems Absolute measurement of the car position For hoisting heights up to 130 m | Speeds up to 4 m/s Absolute measurement of the car position For hoisting heights up to 260 m | Speeds up to 10 m/s Absolute, redundant measurement of the car position For hoisting heights up to 260 m | Speeds up to 10 m/s LIMAX SAFE Shaft Information and Safety System Absolute, redundant recording of the car position. For hoisting heights up to 260 m | Speeds up to 10 m/s Absolute, redundant recording of the car position for the highest buildings. For hoisting heights up to 1,500 m | Speeds up to 18 m/s Electronic evaluation unit in which safety-relevant switching and control functions are implemented Modular system consisting of the LIMAX33 RED sensor and the SAFE BOX. For hoisting heights up to 260 m | Speeds up to 10 m/s Modular system consisting of the LIMAX44 RED sensor and the SAFE BOX For hoisting heights up to 1,500 m | Speeds up to 18 m/s Shaft information system based on the LIMAX33 RED sensor for safe position detection. The safety-related switching and control functions are integrated in the sensor housing. For hoisting heights up to 260 m | Speeds up to 10 m/s | Absolute For industrial applications with a resolution of 1 mm and measuring lengths up to 1000 meters Autoreferencing, absolute measuring system with a resolution of 1 mm and measuring lengths up to 1000 meters Incremental For angular and linear measurements, with 0.1 mm (0.025 mm) resolution. Suitable for long distances, with 2.5 mm resolution. 1.0 mm resolution, up to 10 mm distance between sensor and magnetic tape possible. Low-cost length and angle measuring system, with 0.1 mm (0.025 mm) resolution. Round sensor with 0.1 mm (0.025 mm) resolution. | Absolute Absolute, contactless measuring. With LED and SSI error bit if the distance between sensor and tape gets too large. Resolution 0.01 mm, for measuring lengths up to 20 meters. Magnetic absolute length measuring system for highly dynamic controls Absolute, guided measuring. Resolution 0,01 mm. Incremental Ideal for angular and linear measurements, with 0.01 mm resolution. High Precision Length Measuring System with selectable resolution up to 0.001 mm (1 µm). High precision length measuring system with selectable resolution up to 0,025 mm (2,5 µm). Precision carriage for incremental measurements with pre-installed, selectable measuring system. With speed monitoring and 5 adjustable resolutions. Guided Length Measuring System with a mechanical cylinder with resolutions from 0,1 mm to 0,001 mm. Magnetic-based Length Measuring System with sin/cos signal output. Magnetic-based Length Measuring System with integrated Push-Pull signals for MIN/MAX-limit switches. Guided Measuring System for use in press brakes with a resolution of up to 0,00122 mm. | Absolute Magnetic absolute encoder. High resolution: 16,000 mesauring steps/rev. Single-Turn-Encoder. Resolution of 12 bit over the whole measuring distance. Single Axis Absolute Inclinometer. Measuring range 0° to 90° with analog output 0,5 - 4,5 V. 3 Axes Absolute Inclinometer with high resolution. Measuring range 0° to 90° +/- with 0,025° resolution. Incremental Suited for rotative angular measurement. Wearfree due to contactless measuring principle. Up to 10 000 revolutions/minute. Space-saving and reasonably priced option to rotary encoders. Insensitive against environmental influences. Can be used with all standard incremental ELGO sensors. Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, robust design, IP64. Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, IP54. Incremental Encoder up to 500 pulses/revolution, with 10 mm steel shaft, IP54. Incremental Encoder up to 1000 pulses/revolution, with 12 mm steel shaft, IP66 Hollow Shaft in miniature structural shape, IP54 |
| Inclinometers |
| AbsoluteSingle axis absolute inclinometer: +/- 90°with Analogue output 0.5 - 4.5 V High resolution 3 axisabsolute inclinometer:+/-90°, +/-90° / +/-180°with 0,025° resolution |
| 1-axis mini position indicator 24 VDC 1-axis universal position indicator 1-3-axis position indicator | LED position indicator with two pre-selections and relay outputs Universal position indicator for incremental and absloute measuring systems with relay outputs and integrated RS-232-interface |
| For incremental measurementsSmalest design with integrated or external battery. Battery-powered position indicator for length and angle measurement with resolution up to 0.01 mm Battery powered position indicator with 7-digit LCD-display, a resolution up to 0.01 mm and "°"-symbol. Option: RS232-interface. Battery-powered position indicator with an external sensor and 868 MHz radio transmission. Battery-powered measuring and indicating system with large two-line LCD-display. Electrical battery-powered handwheel with 20 mm hollow shaft, directly attachable to spindle. | For absolute measurements Battery-powered absolute mini position indicator Battery-powered absolute measuring and indicating system with external pluggable sensor Battery-powered absolute 3-axis position indicator Battery-powered absolute measuring system with integrated sensor on the back side of the indicating device. Battery-powered absolute measuring and indicating system with large two-line LCD display |
| Single Axis Compact single axis controller. The P40 is predestined for easy positioning applications. A single axis controller without program memory.Suitable for simple positioning applications. P8721 is a single axis controller with program memory. The program memory allows the processing of up to 200 address lines (proratable into blocks). Single axis controller with an extensive parameter menu. P9521 with additional program memory. | Multiple Axes for sheet metal shears. Intuitive interface and menu navigation, for the complete control of the cutting process. Compact 2 axes controller.The P40 is predestined for easy positioning applications. Low-Cost-Terminal with positioning functions up to 6 axes. This robust and compact controller can be used in a wide range of applications. Touch screen terminal on the basis of the IPC which is characterized by an optimal price-performance ratio and easy handling. P8822 is a 2 axes controller which is easy in handling and enables a fast parameterization |
| SensorsFor Lift
Installation kit for the quick and easy installation of the magnetic tape in the elevator shaft.
General |
SẢN PHẨM TƯƠNG ĐƯƠNG
| Shaft Information Systems for the lift industry | Magnetic length and angle measuring systems up to 1/10 resolution | Magnetic length and angle measuring systems up to 1/1000 resolution | Rotative measuring systems |
| AbsoluteLIMAX Shaft Information Systems Absolute measurement of the car position For hoisting heights up to 130 m | Speeds up to 4 m/s Absolute measurement of the car position For hoisting heights up to 260 m | Speeds up to 10 m/s Absolute, redundant measurement of the car position For hoisting heights up to 260 m | Speeds up to 10 m/s LIMAX SAFE Shaft Information and Safety System Absolute, redundant recording of the car position. For hoisting heights up to 260 m | Speeds up to 10 m/s Absolute, redundant recording of the car position for the highest buildings. For hoisting heights up to 1,500 m | Speeds up to 18 m/s Electronic evaluation unit in which safety-relevant switching and control functions are implemented Modular system consisting of the LIMAX33 RED sensor and the SAFE BOX. For hoisting heights up to 260 m | Speeds up to 10 m/s Modular system consisting of the LIMAX44 RED sensor and the SAFE BOX For hoisting heights up to 1,500 m | Speeds up to 18 m/s Shaft information system based on the LIMAX33 RED sensor for safe position detection. The safety-related switching and control functions are integrated in the sensor housing. For hoisting heights up to 260 m | Speeds up to 10 m/s | Absolute For industrial applications with a resolution of 1 mm and measuring lengths up to 1000 meters Autoreferencing, absolute measuring system with a resolution of 1 mm and measuring lengths up to 1000 meters Incremental For angular and linear measurements, with 0.1 mm (0.025 mm) resolution. Suitable for long distances, with 2.5 mm resolution. 1.0 mm resolution, up to 10 mm distance between sensor and magnetic tape possible. Low-cost length and angle measuring system, with 0.1 mm (0.025 mm) resolution. Round sensor with 0.1 mm (0.025 mm) resolution. | Absolute Absolute, contactless measuring. With LED and SSI error bit if the distance between sensor and tape gets too large. Resolution 0.01 mm, for measuring lengths up to 20 meters. Magnetic absolute length measuring system for highly dynamic controls Absolute, guided measuring. Resolution 0,01 mm. Incremental Ideal for angular and linear measurements, with 0.01 mm resolution. High Precision Length Measuring System with selectable resolution up to 0.001 mm (1 µm). High precision length measuring system with selectable resolution up to 0,025 mm (2,5 µm). Precision carriage for incremental measurements with pre-installed, selectable measuring system. With speed monitoring and 5 adjustable resolutions. Guided Length Measuring System with a mechanical cylinder with resolutions from 0,1 mm to 0,001 mm. Magnetic-based Length Measuring System with sin/cos signal output. Magnetic-based Length Measuring System with integrated Push-Pull signals for MIN/MAX-limit switches. Guided Measuring System for use in press brakes with a resolution of up to 0,00122 mm. | Absolute Magnetic absolute encoder. High resolution: 16,000 mesauring steps/rev. Single-Turn-Encoder. Resolution of 12 bit over the whole measuring distance. Single Axis Absolute Inclinometer. Measuring range 0° to 90° with analog output 0,5 - 4,5 V. 3 Axes Absolute Inclinometer with high resolution. Measuring range 0° to 90° +/- with 0,025° resolution. Incremental Suited for rotative angular measurement. Wearfree due to contactless measuring principle. Up to 10 000 revolutions/minute. Space-saving and reasonably priced option to rotary encoders. Insensitive against environmental influences. Can be used with all standard incremental ELGO sensors. Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, robust design, IP64. Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, IP54. Incremental Encoder up to 500 pulses/revolution, with 10 mm steel shaft, IP54. Incremental Encoder up to 1000 pulses/revolution, with 12 mm steel shaft, IP66 Hollow Shaft in miniature structural shape, IP54 |
| Inclinometers |
| AbsoluteSingle axis absolute inclinometer: +/- 90°with Analogue output 0.5 - 4.5 V High resolution 3 axisabsolute inclinometer:+/-90°, +/-90° / +/-180°with 0,025° resolution |
| 1-axis mini position indicator 24 VDC 1-axis universal position indicator 1-3-axis position indicator | LED position indicator with two pre-selections and relay outputs Universal position indicator for incremental and absloute measuring systems with relay outputs and integrated RS-232-interface |
| For incremental measurementsSmalest design with integrated or external battery. Battery-powered position indicator for length and angle measurement with resolution up to 0.01 mm Battery powered position indicator with 7-digit LCD-display, a resolution up to 0.01 mm and "°"-symbol. Option: RS232-interface. Battery-powered position indicator with an external sensor and 868 MHz radio transmission. Battery-powered measuring and indicating system with large two-line LCD-display. Electrical battery-powered handwheel with 20 mm hollow shaft, directly attachable to spindle. | For absolute measurements Battery-powered absolute mini position indicator Battery-powered absolute measuring and indicating system with external pluggable sensor Battery-powered absolute 3-axis position indicator Battery-powered absolute measuring system with integrated sensor on the back side of the indicating device. Battery-powered absolute measuring and indicating system with large two-line LCD display |
| Single Axis Compact single axis controller. The P40 is predestined for easy positioning applications. A single axis controller without program memory.Suitable for simple positioning applications. P8721 is a single axis controller with program memory. The program memory allows the processing of up to 200 address lines (proratable into blocks). Single axis controller with an extensive parameter menu. P9521 with additional program memory. | Multiple Axes for sheet metal shears. Intuitive interface and menu navigation, for the complete control of the cutting process. Compact 2 axes controller.The P40 is predestined for easy positioning applications. Low-Cost-Terminal with positioning functions up to 6 axes. This robust and compact controller can be used in a wide range of applications. Touch screen terminal on the basis of the IPC which is characterized by an optimal price-performance ratio and easy handling. P8822 is a 2 axes controller which is easy in handling and enables a fast parameterization |
| SensorsFor Lift
Installation kit for the quick and easy installation of the magnetic tape in the elevator shaft.
General |
| Shaft Information Systems for the lift industry | Magnetic length and angle measuring systems up to 1/10 resolution | Magnetic length and angle measuring systems up to 1/1000 resolution | Rotative measuring systems |
| AbsoluteLIMAX Shaft Information Systems Absolute measurement of the car position For hoisting heights up to 130 m | Speeds up to 4 m/s Absolute measurement of the car position For hoisting heights up to 260 m | Speeds up to 10 m/s Absolute, redundant measurement of the car position For hoisting heights up to 260 m | Speeds up to 10 m/s LIMAX SAFE Shaft Information and Safety System Absolute, redundant recording of the car position. For hoisting heights up to 260 m | Speeds up to 10 m/s Absolute, redundant recording of the car position for the highest buildings. For hoisting heights up to 1,500 m | Speeds up to 18 m/s Electronic evaluation unit in which safety-relevant switching and control functions are implemented Modular system consisting of the LIMAX33 RED sensor and the SAFE BOX. For hoisting heights up to 260 m | Speeds up to 10 m/s Modular system consisting of the LIMAX44 RED sensor and the SAFE BOX For hoisting heights up to 1,500 m | Speeds up to 18 m/s Shaft information system based on the LIMAX33 RED sensor for safe position detection. The safety-related switching and control functions are integrated in the sensor housing. For hoisting heights up to 260 m | Speeds up to 10 m/s | Absolute For industrial applications with a resolution of 1 mm and measuring lengths up to 1000 meters Autoreferencing, absolute measuring system with a resolution of 1 mm and measuring lengths up to 1000 meters Incremental For angular and linear measurements, with 0.1 mm (0.025 mm) resolution. Suitable for long distances, with 2.5 mm resolution. 1.0 mm resolution, up to 10 mm distance between sensor and magnetic tape possible. Low-cost length and angle measuring system, with 0.1 mm (0.025 mm) resolution. Round sensor with 0.1 mm (0.025 mm) resolution. | Absolute Absolute, contactless measuring. With LED and SSI error bit if the distance between sensor and tape gets too large. Resolution 0.01 mm, for measuring lengths up to 20 meters. Magnetic absolute length measuring system for highly dynamic controls Absolute, guided measuring. Resolution 0,01 mm. Incremental Ideal for angular and linear measurements, with 0.01 mm resolution. High Precision Length Measuring System with selectable resolution up to 0.001 mm (1 µm). High precision length measuring system with selectable resolution up to 0,025 mm (2,5 µm). Precision carriage for incremental measurements with pre-installed, selectable measuring system. With speed monitoring and 5 adjustable resolutions. Guided Length Measuring System with a mechanical cylinder with resolutions from 0,1 mm to 0,001 mm. Magnetic-based Length Measuring System with sin/cos signal output. Magnetic-based Length Measuring System with integrated Push-Pull signals for MIN/MAX-limit switches. Guided Measuring System for use in press brakes with a resolution of up to 0,00122 mm. | Absolute Magnetic absolute encoder. High resolution: 16,000 mesauring steps/rev. Single-Turn-Encoder. Resolution of 12 bit over the whole measuring distance. Single Axis Absolute Inclinometer. Measuring range 0° to 90° with analog output 0,5 - 4,5 V. 3 Axes Absolute Inclinometer with high resolution. Measuring range 0° to 90° +/- with 0,025° resolution. Incremental Suited for rotative angular measurement. Wearfree due to contactless measuring principle. Up to 10 000 revolutions/minute. Space-saving and reasonably priced option to rotary encoders. Insensitive against environmental influences. Can be used with all standard incremental ELGO sensors. Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, robust design, IP64. Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, IP54. Incremental Encoder up to 500 pulses/revolution, with 10 mm steel shaft, IP54. Incremental Encoder up to 1000 pulses/revolution, with 12 mm steel shaft, IP66 Hollow Shaft in miniature structural shape, IP54 |
| Inclinometers |
| AbsoluteSingle axis absolute inclinometer: +/- 90°with Analogue output 0.5 - 4.5 V High resolution 3 axisabsolute inclinometer:+/-90°, +/-90° / +/-180°with 0,025° resolution |
| 1-axis mini position indicator 24 VDC 1-axis universal position indicator 1-3-axis position indicator | LED position indicator with two pre-selections and relay outputs Universal position indicator for incremental and absloute measuring systems with relay outputs and integrated RS-232-interface |
| For incremental measurementsSmalest design with integrated or external battery. Battery-powered position indicator for length and angle measurement with resolution up to 0.01 mm Battery powered position indicator with 7-digit LCD-display, a resolution up to 0.01 mm and "°"-symbol. Option: RS232-interface. Battery-powered position indicator with an external sensor and 868 MHz radio transmission. Battery-powered measuring and indicating system with large two-line LCD-display. Electrical battery-powered handwheel with 20 mm hollow shaft, directly attachable to spindle. | For absolute measurements Battery-powered absolute mini position indicator Battery-powered absolute measuring and indicating system with external pluggable sensor Battery-powered absolute 3-axis position indicator Battery-powered absolute measuring system with integrated sensor on the back side of the indicating device. Battery-powered absolute measuring and indicating system with large two-line LCD display |
| Single Axis Compact single axis controller. The P40 is predestined for easy positioning applications. A single axis controller without program memory.Suitable for simple positioning applications. P8721 is a single axis controller with program memory. The program memory allows the processing of up to 200 address lines (proratable into blocks). Single axis controller with an extensive parameter menu. P9521 with additional program memory. | Multiple Axes for sheet metal shears. Intuitive interface and menu navigation, for the complete control of the cutting process. Compact 2 axes controller.The P40 is predestined for easy positioning applications. Low-Cost-Terminal with positioning functions up to 6 axes. This robust and compact controller can be used in a wide range of applications. Touch screen terminal on the basis of the IPC which is characterized by an optimal price-performance ratio and easy handling. P8822 is a 2 axes controller which is easy in handling and enables a fast parameterization |
| SensorsFor Lift
Installation kit for the quick and easy installation of the magnetic tape in the elevator shaft.
General |
LIÊN HỆ
- là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp,.... Bên cạnh đó chúng tôi là nhà thực hiện các giải pháp tích hợp trong công nghiêp, dân dụng, xây dựng,... Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa hiện nay
Liên hệ cho chúng tôi để CÓ thông tin mà Quý khách CẦN.
[ Email ] | |
Online contact========
Yahoo: nhan.luongthe
Skype: luongthenhan
===================
Greentech Trading Service Company Limited
[ Main Office ] 104/15 Street 18, Binh Hung Hoa Ward, Binh Tan Dist, HCMC, Viet Nam
[ Brand Office ] 92/8 Huynh Thuc Khang Street, Tam Ky City, Quang Nam Province, Viet Nam
[ Tel & Fax ] + 84 (0) 8 3620 4585
[ Website ] |
[ Face Page ]
-------------------------------
Ø Flow, pressure and level measurement | Temperature and humidity measurement | Position measurement | Force measurement
Ø Optical and acoustic measurement | Electrical measurement | Hydraulics – Pneumatic
Ø Valve - Pipes, tubes and fittings
Ø Building Management System
Ø Smarthome
µ FAST - FLEXIBLE - FLASH µ
-------------------------------------------------------------------
Pelco Vietnam | Solvac Vietnam | Citizen Vietnam | | Renishaw Vietnam | Di-soric Vietnam | | | | Bacharach Vietnam | | Showa Denki Vietnam | S | | | | Tetra-K Electronic Vietnam | | | | | | Mitsubishi Vietnam | Siemens Vietnam | Omron Viet Nam | TPM Vietnam | Tecsis Vietnam | Wise Control Vietnam | Micro Process Controls Vietnam | Wika Vietnam | Asahi Gauge Vietnam | TemPress Vietnam | Itec Vietnam | Konics Vietnam | Ashcroft Vietnam | Ametek Vietnam – Afriso Vietnam | LS Industrial Vietnam | RS Automation Vietnam | Balluff Vietnam | Baumer Vietnam | Kuppler Vietnam | Pulsotronics Vietnam | Leuze Vietnam | Microsonic Vietnam | AST Vietnam | Tempsen Vietnam | STS Vietnam | Micro Dectector Vietnam | Proxitron Vietnam | Microsens Vietnam | Towa Seiden Vietnam | Promesstec Vietnam | Ski Vietnam | Eltra Vietnam | Hohner Vietnam | Posital Vietnam | Elap Vietnam | Beisensors Vietnam | Newall Vietnam | Dotech Vietnam | Watlow Vietnam | Bihl Weidemann Vietnam | Prosoft Vietnam | ICP DAS Vietnam | Beckhoff Vietnam | Keller M S R Vietnam | IRCON Vietnam | Raytek Vietnam | Kimo Vietnam | YSI Vietnam | Jenco Vietnam | Tekhne Vietnam | Atago Vietnam | E Instrument Vietnam | IMR Vietnam | Netbiter Viêt Nam | FMS Vietnam | Unipulse Vietnam | Migun Vietnam | Sewha Vietnam | HBM Vietnam | Pilz Vietnam | Dold Vietnam | | Puls Vietnam | Microsens Vietnam | Controller Sensor Vietnam | Mark|10 Vietnam | Schmidt Vietnam | Bernstein Vietnam | Celduc Vietnam | Univer Vietnam | Waicom Vietnam | Aignep Vietnam | Top Air Vietnam | Burket Vietnam | | JJ Automation Vietnam | Somas Vietnam | Delta Elektrogas Vietnam | Pentair Vietnam | Auma Vietnam | Sipos Artorik Vietnam | Flowserve Vietnam | Sinbon Vietnam | Setra Vietnam | Yottacontrok Vietnam | Sensor Tival Vietnam | Vaisala Vietnam | Crouzet Vietnam | RheinTacho Vietnam | Cityzen Seimitsu Vietnam | Flowserve Vietnam | Greatork Vietnam | PS Automation Vietnam | Bettis Vietnam | Sinbon Vietnam | Setra Vietnam | Laurel Vietnam | Datapaq Vietnam | EE Electronik Vietnam | Banico Vietnam | Sinfonia Vietnam | Digmesa Vietnam | Alia Vietnam | Flowline Vietnam | Brook Instrument Vietnam | Dakota Instrument Vietnam | Diehl Metering Vietnam | Stego Vietnam | Rotronic Vietnam | Hopeway Vietnam | Beko Vietnam | Matsui Vietnam | Westec Vietnam | Sometech Vietnam | Offshore Vietnam | DCbox Vietnam | Fanuc Vietnam | KollMorgen Vietnam | Endress & Hauser Vietnam | Metso Automation Vietnam | MKS Instruments Vietnam | Teledyne Instruments Vieatnam | Badger Meter Vietnam | Hirschmann Vietnam | Servo Mitsubishi Vietnam | SCR SA Việt Nam | Biotech Flow Meter Việt Nam | Thermo Electric Việt Nam | Siko Việt Nam | Klinger Việt Nam | HK Instrument Việt Nam | Magnetrol Viet Nam | Lika Viet Nam | Setra Viet Nam | Kistler Viet Nam | Renishaw Viet Nam | Mindmen Vietnam | | Gimatic Vietnam | Monarch Instrument Vietnam | Stauff Vietnam | Burster Vietnam | SDT International Vietnam | MTI Instrument Vietnam | Zhuzhou CRRC Vietnam | Sensorex Vietnam | TWK Elektronik Vietnam | ASC Vietnam | Ronds Vietnam | Klaschka Vietnam | Hubner Vietnam | Hainzl Vietnam | Labom Vietnam | Siko Vietnam | Rittmeyer Vietnam | TR Electronic Vietnam | AK Industry Vietnam | Precizika Metrology Vietnam | Dis Sensor Vietnam | Elap Vietnam | Wachendorff Automation Vietnam | Foxboro Vietnam | Fireray Vietnam | Fiessler Elektronik Vietnam | Watt Drive Vietnam | Murr Elektronik Vietnam | Zander Vietnam | Elgo Vietnam
Sản phẩm cùng loại
Vui lòng gọi
Vui lòng gọi
Vui lòng gọi
Vui lòng gọi
Vui lòng gọi
Vui lòng gọi
Vui lòng gọi
Vui lòng gọi
Vui lòng gọi
Vui lòng gọi
Vui lòng gọi
Vui lòng gọi
Vui lòng gọi
Vui lòng gọi
Vui lòng gọi
Vui lòng gọi
41,000 đ
55,000 đ
35,000 đ
Thiết kế Web gian hàng chuyên nghiệp chỉ với 30 phút
