| Accessories |
Options
Current input
For power or load current measurement (1 sensor necessary for single-phase measurements, and 2 or 3 sensors required for 3-phase measurements)
AC CURRENT SENSOR CT7126
60 A AC, φ15 mm (0.59 in), 2.5 m (8.20 ft) cord length
AC CURRENT SENSOR CT7131
100 A AC, φ15 mm (0.59 in), 2.5 m (8.20 ft) cord length
AC CURRENT SENSOR CT7136
600 A AC, φ46 mm (1.81 in), 2.5 m (8.20 ft) cord length
AC FLEXIBLE CURRENT SENSOR CT7040 series
• 10 Hz to 50 kHz (±3dB) • 600A or 6000A AC rated • φ 254 mm (10.00 in) loop dia. to φ 100 mm (3.94 in)
Learn more
Leak current input
*For leak current measurement (not capable of power measurement)
AC LEAKAGE CURRENT SENSOR CT7116
6 A AC, φ40 mm (1.57 in), 2.5 m (8.20 ft) cord length
AC/DC current input
AC/DC AUTO-ZERO CURRENT SENSOR CT7731
・ DC to 5 kHz (-3dB) ・ Rated 100 A AC/DC ・φ 33 mm (1.30 in) core dia.
Learn more
AC/DC AUTO-ZERO CURRENT SENSOR CT7736
・ DC to 5 kHz (-3dB) ・ Rated 600 A AC/DC ・φ 33 mm (1.30 in) core dia.
Learn more
AC/DC AUTO-ZERO CURRENT SENSOR CT7742
・ DC to 5 kHz (-3dB) ・ Rated 2000 A AC/DC ・φ 55 mm (2.17 in) core dia.
Learn more
EXTENSION CABLE L0220-01
2 m (6.56 ft) length
EXTENSION CABLE L0220-02
5 m (16.41 ft) length
EXTENSION CABLE L0220-03
10 m (32.81 ft) length
Voltage input
*The L1000 is bundled with PQ3198 *Please inquire about voltage cord extension
VOLTAGE CORD L1000
Red/ Yellow/ Blue/ Gray each 1, Black 4, 3m (9.84ft) length, Alligator clip ×8
WIRING ADAPTER PW9000
When three-phase 3-wire connection, the voltage cord to be connected can be reduced from 6 to 3
WIRING ADAPTER PW9001
When three-phase 4-wire connection, the voltage cord to be connected can be reduced from 6 to 4
PATCH CORD L1021-01
Banana branch-banana, Red: 1, Cable length: 0.5 m, For branching from the L9438s or L1000s, CAT IV 600 V, CAT III 1000 V
PATCH CORD L1021-02
Banana branch-banana, Black: 1, Cable length: 0.5 m, For branching from the L9438s or L1000s, CAT IV 600 V, CAT III 1000 V
GRABBER CLIP 9243
Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V
MAGNETIC ADAPTER 9804-01
Attaches to the tip of cord, red ×1, φ11 mm (0.43 in)
MAGNETIC ADAPTER 9804-02
Attaches to the tip of cord, black ×1, φ11 mm (0.43 in)
Storage media
*The Z4001 is bundled to PQ3198 only
SD Card Precaution
Use only the SD Card sold by HIOKI. Compatibility and performance are not guaranteed for SD cards made by other manufacturers. You may be unable to read from or save data to such cards.
SD MEMORY CARD 2GB Z4001
2 GB capacity
SD MEMORY CARD Z4003
8 GB capacity
Power supply
*The Z1002, Z1003 are bundled
AC ADAPTER Z1002
For main unit, 100 to 240 V AC
BATTERY PACK Z1003
NiMH, Charges while installed in the main unit
PC peripherals
Shared options for the PQ3100 / PQ3198
GENNECT CROSS SF4000
• Software automatically recognizes LAN-connected measuring instrument • Display acquired data as graphs in real-time • Windows compatible
Learn more
PQ3198 synchronization
For PQ3198 only
GPS BOX PW9005
To synchronize the PQ3198 / PW3198 clock to UTC
Other options
CONVERSION CABLE L9910
Used to connect the current sensors with BNC terminal to PL14 terminal (example the PQ3100)
LAN CABLE 9642
Straight Ethernet cable, supplied with straight to cross conversion adapter, 5 m (16.41 ft) length
Hands-free options
When using with PQ3100 / PQ3198, suspend the main body on the metal surface using two Z5020 powerful type.
Z5004 hang the cords on the metal surface.
MAGNETIC STRAP Z5020
Heavy-duty
MAGNETIC STRAP Z5004
Cases
CARRYING CASE C1001
Soft type, Includes compartment for options
CARRYING CASE C1002
Hard trunk type, Includes compartment for options
CARRYING CASE C1009
Options
Current input
For power or load current measurement (1 sensor necessary for single-phase measurements, and 2 or 3 sensors required for 3-phase measurements)
AC CURRENT SENSOR CT7126
60 A AC, φ15 mm (0.59 in), 2.5 m (8.20 ft) cord length
AC CURRENT SENSOR CT7131
100 A AC, φ15 mm (0.59 in), 2.5 m (8.20 ft) cord length
AC CURRENT SENSOR CT7136
600 A AC, φ46 mm (1.81 in), 2.5 m (8.20 ft) cord length
AC FLEXIBLE CURRENT SENSOR CT7040 series
• 10 Hz to 50 kHz (±3dB) • 600A or 6000A AC rated • φ 254 mm (10.00 in) loop dia. to φ 100 mm (3.94 in)
Learn more
Leak current input
*For leak current measurement (not capable of power measurement)
AC LEAKAGE CURRENT SENSOR CT7116
6 A AC, φ40 mm (1.57 in), 2.5 m (8.20 ft) cord length
AC/DC current input
AC/DC AUTO-ZERO CURRENT SENSOR CT7731
・ DC to 5 kHz (-3dB) ・ Rated 100 A AC/DC ・φ 33 mm (1.30 in) core dia.
Learn more
AC/DC AUTO-ZERO CURRENT SENSOR CT7736
・ DC to 5 kHz (-3dB) ・ Rated 600 A AC/DC ・φ 33 mm (1.30 in) core dia.
Learn more
AC/DC AUTO-ZERO CURRENT SENSOR CT7742
・ DC to 5 kHz (-3dB) ・ Rated 2000 A AC/DC ・φ 55 mm (2.17 in) core dia.
Learn more
EXTENSION CABLE L0220-01
2 m (6.56 ft) length
EXTENSION CABLE L0220-02
5 m (16.41 ft) length
EXTENSION CABLE L0220-03
10 m (32.81 ft) length
Voltage input
*The L1000 is bundled with PQ3198 *Please inquire about voltage cord extension
VOLTAGE CORD L1000
Red/ Yellow/ Blue/ Gray each 1, Black 4, 3m (9.84ft) length, Alligator clip ×8
WIRING ADAPTER PW9000
When three-phase 3-wire connection, the voltage cord to be connected can be reduced from 6 to 3
WIRING ADAPTER PW9001
When three-phase 4-wire connection, the voltage cord to be connected can be reduced from 6 to 4
PATCH CORD L1021-01
Banana branch-banana, Red: 1, Cable length: 0.5 m, For branching from the L9438s or L1000s, CAT IV 600 V, CAT III 1000 V
PATCH CORD L1021-02
Banana branch-banana, Black: 1, Cable length: 0.5 m, For branching from the L9438s or L1000s, CAT IV 600 V, CAT III 1000 V
GRABBER CLIP 9243
Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V
MAGNETIC ADAPTER 9804-01
Attaches to the tip of cord, red ×1, φ11 mm (0.43 in)
MAGNETIC ADAPTER 9804-02
Attaches to the tip of cord, black ×1, φ11 mm (0.43 in)
Storage media
*The Z4001 is bundled to PQ3198 only
SD Card Precaution
Use only the SD Card sold by HIOKI. Compatibility and performance are not guaranteed for SD cards made by other manufacturers. You may be unable to read from or save data to such cards.
SD MEMORY CARD 2GB Z4001
2 GB capacity
SD MEMORY CARD Z4003
8 GB capacity
Power supply
*The Z1002, Z1003 are bundled
AC ADAPTER Z1002
For main unit, 100 to 240 V AC
BATTERY PACK Z1003
NiMH, Charges while installed in the main unit
PC peripherals
Shared options for the PQ3100 / PQ3198
GENNECT CROSS SF4000
• Software automatically recognizes LAN-connected measuring instrument • Display acquired data as graphs in real-time • Windows compatible
Learn more
PQ3198 synchronization
For PQ3198 only
GPS BOX PW9005
To synchronize the PQ3198 / PW3198 clock to UTC
Other options
CONVERSION CABLE L9910
Used to connect the current sensors with BNC terminal to PL14 terminal (example the PQ3100)
LAN CABLE 9642
Straight Ethernet cable, supplied with straight to cross conversion adapter, 5 m (16.41 ft) length
Hands-free options
When using with PQ3100 / PQ3198, suspend the main body on the metal surface using two Z5020 powerful type.
Z5004 hang the cords on the metal surface.
MAGNETIC STRAP Z5020
Heavy-duty
MAGNETIC STRAP Z5004
Cases
CARRYING CASE C1001
Soft type, Includes compartment for options
CARRYING CASE C1002
Hard trunk type, Includes compartment for options
CARRYING CASE C1009
Options
Current input
For power or load current measurement (1 sensor necessary for single-phase measurements, and 2 or 3 sensors required for 3-phase measurements)
AC CURRENT SENSOR CT7126
60 A AC, φ15 mm (0.59 in), 2.5 m (8.20 ft) cord length
AC CURRENT SENSOR CT7131
100 A AC, φ15 mm (0.59 in), 2.5 m (8.20 ft) cord length
AC CURRENT SENSOR CT7136
600 A AC, φ46 mm (1.81 in), 2.5 m (8.20 ft) cord length
AC FLEXIBLE CURRENT SENSOR CT7040 series
• 10 Hz to 50 kHz (±3dB) • 600A or 6000A AC rated • φ 254 mm (10.00 in) loop dia. to φ 100 mm (3.94 in)
Learn more
Leak current input
*For leak current measurement (not capable of power measurement)
AC LEAKAGE CURRENT SENSOR CT7116
6 A AC, φ40 mm (1.57 in), 2.5 m (8.20 ft) cord length
AC/DC current input
AC/DC AUTO-ZERO CURRENT SENSOR CT7731
・ DC to 5 kHz (-3dB) ・ Rated 100 A AC/DC ・φ 33 mm (1.30 in) core dia.
Learn more
AC/DC AUTO-ZERO CURRENT SENSOR CT7736
・ DC to 5 kHz (-3dB) ・ Rated 600 A AC/DC ・φ 33 mm (1.30 in) core dia.
Learn more
AC/DC AUTO-ZERO CURRENT SENSOR CT7742
・ DC to 5 kHz (-3dB) ・ Rated 2000 A AC/DC ・φ 55 mm (2.17 in) core dia.
Learn more
EXTENSION CABLE L0220-01
2 m (6.56 ft) length
EXTENSION CABLE L0220-02
5 m (16.41 ft) length
EXTENSION CABLE L0220-03
10 m (32.81 ft) length
Voltage input
*The L1000 is bundled with PQ3198 *Please inquire about voltage cord extension
VOLTAGE CORD L1000
Red/ Yellow/ Blue/ Gray each 1, Black 4, 3m (9.84ft) length, Alligator clip ×8
WIRING ADAPTER PW9000
When three-phase 3-wire connection, the voltage cord to be connected can be reduced from 6 to 3
WIRING ADAPTER PW9001
When three-phase 4-wire connection, the voltage cord to be connected can be reduced from 6 to 4
PATCH CORD L1021-01
Banana branch-banana, Red: 1, Cable length: 0.5 m, For branching from the L9438s or L1000s, CAT IV 600 V, CAT III 1000 V
PATCH CORD L1021-02
Banana branch-banana, Black: 1, Cable length: 0.5 m, For branching from the L9438s or L1000s, CAT IV 600 V, CAT III 1000 V
GRABBER CLIP 9243
Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V
MAGNETIC ADAPTER 9804-01
Attaches to the tip of cord, red ×1, φ11 mm (0.43 in)
MAGNETIC ADAPTER 9804-02
Attaches to the tip of cord, black ×1, φ11 mm (0.43 in)
Storage media
*The Z4001 is bundled to PQ3198 only
SD Card Precaution
Use only the SD Card sold by HIOKI. Compatibility and performance are not guaranteed for SD cards made by other manufacturers. You may be unable to read from or save data to such cards.
SD MEMORY CARD 2GB Z4001
2 GB capacity
SD MEMORY CARD Z4003
8 GB capacity
Power supply
*The Z1002, Z1003 are bundled
AC ADAPTER Z1002
For main unit, 100 to 240 V AC
BATTERY PACK Z1003
NiMH, Charges while installed in the main unit
PC peripherals
Shared options for the PQ3100 / PQ3198
GENNECT CROSS SF4000
• Software automatically recognizes LAN-connected measuring instrument • Display acquired data as graphs in real-time • Windows compatible
Learn more
PQ3198 synchronization
For PQ3198 only
GPS BOX PW9005
To synchronize the PQ3198 / PW3198 clock to UTC
Other options
CONVERSION CABLE L9910
Used to connect the current sensors with BNC terminal to PL14 terminal (example the PQ3100)
LAN CABLE 9642
Straight Ethernet cable, supplied with straight to cross conversion adapter, 5 m (16.41 ft) length
Hands-free options
When using with PQ3100 / PQ3198, suspend the main body on the metal surface using two Z5020 powerful type.
Z5004 hang the cords on the metal surface.
MAGNETIC STRAP Z5020
Heavy-duty
MAGNETIC STRAP Z5004
Cases
CARRYING CASE C1001
Soft type, Includes compartment for options
CARRYING CASE C1002
Hard trunk type, Includes compartment for options
CARRYING CASE C1009
|
