E3ZM-CT61 | Omron E3ZM-CT61 | Cảm biến quang |Compact Photoelectric Sensor with Built-in Amplifier

Standard Electrodes are made of stainless steel (SUS 304) and can be used in applications for purified water.

SUS316 Electrodes can be used in applications where resistance to corrosion is required. Titanium and HAS Electrodes can be used in applications where resistance to acid is required.

For applications where long electrodes are required, a connection nut and two Lock Nuts can be used to extend the electrodes 1 m at a time.

Material indications are provided on all OMRON electrodes, connection nuts, and Lock Nuts.

Electrodes

Select an electrode appropriate for the type of liquid. Refer to Technical Guide for Level Controllers.

Model	Material	Weight (g)	Material indication lines
F03-01 SUS304	SUS304	Approx. 170	1 line
F03-01 SUS316	SUS316	Approx. 170	2 lines
F03-01 HAS B	N10665 *	Approx. 195	3 lines
F03-01 HAS C	N10276 *	Approx. 190	4 lines
F03-01 TITANIUM	Titanium	Approx. 100	5 lines

* UNS No. (Unified Numbering System No.) is an international metal designation system that specifies a unique number
for each material.

Insulated Electrodes

Electrodes are insulated with a plastic sheath to prevent them from touching each other and to isolate them from debris in the liquid.
Before application, strip back about 10 cm of the sheath at the end to ensure sufficient conductivity.

Model
F03-01 SUS304	Vinyl Tubing
F03-01 SUS304	Fluororesin Tubing
F03-01 SUS316	Vinyl Tubing
F03-01 SUS316	Fluororesin Tubing

Note: Tubing comes in 1-m lengths with a sheath thickness of 0.5 mm.

Connecting Nuts

Model	Material	Weight (g)	Material indication
F03-02 SUS304 *1	SUS303 (Equivalent to SUS304)	Approx. 12	Blank
F03-02 SUS316 *1	SUS316	Approx. 12	6
F03-02 HAS B	N10665 *2	Approx. 20	B
F03-02 HAS C	N10276 *2	Approx. 20	C
F03-02 TITANIUM	Titanium	Approx. 6	T

*1. Spring washers made of the same material are included with the F03-02 SUS304 and F03-02 SUS316.
       Spring washers are not included with the other models.
       OMRON does not sell spring washers by themselves.
*2. UNS No. (Unified Numbering System No.) is an international metal designation system that specifies a unique
       number for each material.

Electrode Sets

An Electrode Set consists of an electrode, a connecting nut, and two Lock Nuts.

Set model	Components	No. of parts in an set	Weight (g)
F03-60 SUS304	F03-01 SUS304	1	Approx. 190
	F03-02 SUS304	1
	F03-03 SUS304	2
F03-60 SUS316	F03-01 SUS316	1
	F03-02 SUS316	1
	F03-03 SUS316	2

Note: HAS and titanium Electrodes do not come in sets.

Lock Nuts

Model	Material	Weight (g)	Material indication
F03-03 SUS304 *1	SUS303 (Equivalent to SUS304)	Approx. 2	Blank
F03-03 SUS316 *1	SUS316	Approx. 2	6
F03-03 HAS B	N10665 *2	Approx. 5	B
F03-03 HAS C	N10276 *2	Approx. 5	C
F03-03 TITANIUM	Titanium	Approx. 2	T

*1. Only SUS304 and SUS316 Lock Nuts come with spring washers made of the same material. HAS B, HAS C and
TITANIUM don't come with spring washer.
*2. UNS No. (Unified Numbering System No.) is an international metal designation system that specifies a unique
number for each material.

Electrode Separators

When long electrodes are required, use Separators at each joint (every 1 m) to prevent the Electrodes from touching each other.
Use a 1-pole Separator with BF Electrode Holders. The five-pole model can be used with PS-5S and PS-4S Electrode Holders.
Separators cannot be used with PS-31 Electrode Holders.

Model	No. of Electrodes	Dimensions	Applicable Electrode Holder	Weight (g)	Material	Operating Temperature
F03-14 1P	1		BF-[](R)	Approx. 15	Ceramic	250 ° C max.
F03-14 3P	3		PS-3S(R)	Approx. 30
F03-14 5P	5		PS-4S(R) PS-5S(R)	Approx. 30

Note: The Electrode Separators cannot be used unless the Electrodes are coupled.

Note: When using two or more Separators, be careful with the mounting direction of the connecting nut screws which connect electrodes. Avoid the screws from touching each other.

Accessories (Order Separately)

Application	Model
Protective Cover (for PS-[]S and BF-3/-5)	F03-11
Mounting Frame (for PS-[]S)	F03-12
Mounting Frame for Installing in Concrete (for PS-[]S)	F03-13
Dust-proof Rubber Cap (for PS-31)	F03-31

Caution: All units are in millimeters unless otherwise indicated.

Electrode

F03-01

Lock Nut

F03-03
SUS304
SUS316
Titanium

F03-03
HAS B
HAS C

Connecting nut

F03-02
SUS304
SUS316

F03-02
HAS B
HAS C

F03-02
Titanium

Note: 1. Dimension when mounting Electrodes.
2. Clamp screws are not provided for HAS B, HAS C, or titanium models. F03-03 Lock Nuts are used to
mount Electrodes.

Catalog Name	Catalog Number	Last Update	Download
F03-[] Data Sheet	-	Apr 21, 2016	[469KB]
Safety Precautions for Electrodes and Electrode Holders	-	Nov 21, 2008	[121KB]

- - Công ty TNHH TM DV GREENTECH là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp,.... Bên cạnh đó chúng tôi là nhà thực hiện các giải pháp tích hợp trong công nghiêp, dân dụng, xây dựng,... Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa hiện nay

Liên hệ cho chúng tôi để CÓ thông tin mà Quý khách CẦN.

< SALE & TECHNICAL SUPPORT >

< PROJECT SUPPORT >
Email : sales@greentechvn.com

-------------------------------------------------------------------

-------------------------------------------------------------------