Servoguide Mark-Ⅳ D-Series | Bộ canh chỉnh biên Mark-Ⅳ D-Series Nireco

(0 đánh giá)

Mã SP: Mark-Ⅳ D-Series
Vui lòng gọi

Xuất xứ :Nireco

Nơi rao bán :Toàn quốc

Tình trạng :Mới 100%

Ngày cập nhật :04-10-2019 09:36:48

Bảo hành :12 tháng

Servoguide Mark-Ⅳ D-Series | Bộ canh chỉnh biên Mark-Ⅳ D-Series Nireco

LIÊN HỆ VỚI NGƯỜI BÁN

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

0914 599 052

bth.akinapro03@gmail.com

https://nireco-vietnam.gianhangvn.com

Ghi chú: GianHangVN không trực tiếp bán sản phẩm, vui lòng liên hệ trực tiếp với người bán bên trên.

Servoguide Mark-Ⅳ D-Series

PNEUMATIC-HYDRAULIC TYPE

 

1. Mô tả Servoguide Mark-Ⅳ D-Series

The Servoguide MK-IV is a new type of hydraulic controller which embodies our long experience and technology in the field of web control.

The Servoguide MK-IV.D is a pneumatic-hydraulic Edge Position Control(EPC) device. The edge sensors are pneumatic, which gives them an extremely simple structure, while the controller is a robust, yet highly responsive, hydraulic unit. Control is precise and maintenance is simple.

Servoguide Mark-Ⅳ D-Series | Bộ canh chỉnh biên Mark-Ⅳ D-Series Nireco

 

 

  • Servoguide Mark-Ⅳ D053

Low load type
Model D053, priced lowest among the Servoguide series, is a controller for low loads.

  • Servoguide Mark-Ⅳ D121 

Syngle type
Model D121 is the standard model of the Servoguide MK-IV series, which can be used for most machines.

  • Servoguide Mark-Ⅳ D226

Twin type
Two Servoguide MK-IV controllers are mounted on one hydraulic pump unit in the model D226. Economical and compact instrumentation can be obtained when more than one EPC system(eg. laminator line, multi-stage guide roll, etc.) is installed nearby.

  • Servoguide Mark-Ⅳ D721

High load-type
Model D721 is a high-power Servoguide which can be applied for high loads and high-speed lines.

 

2. Đặc tính Servoguide Mark-Ⅳ D-Series

  • Compact and inexpensive.
  • Excellent control accuracy (control within ±0.1mm according to installation conditions).
  • No contact between sensor and web.
  • Very easy installation and maintenance.
  • Large operating force and high sensitivity and accuracy.
  • All hydraulic devices are incorporated in the oil reservoir, thus eliminating oil leakage.
  • Quiet operation due to the special construction that prevents noise emission
  • (Operating noise level : below 65 dB (A)).
  • Use of a long-Iife and easy-to-maintain non-contact rotary blower allows clean air to be supplied.
  • Use of a general-purpose motor makes all models explosion proof and increases safety.

 

3. Thông số kỹ thuật Servoguide Mark-Ⅳ D-Series

MODEL Type Max operating pressure  Pump capacity  Pump type Motor Output Max. operating force kN Max. operating speed 
Mpa L/min W Cylinder bore mm with no load mm/s 
        Cylinder bore mm
      50 80 50 80
D053 Low load 1 2 Fix displacement 200 1.9 4.9 20 8
(No-load)
D121 Single standard 1.5 4.2 Fix displacement 400 2.9 7.4 34 13
(No-load)
D226 Twin standard 1.5 4.2 Fix displacement 400 2.9 7.4 20 8
(No-load)
D721 High load 2.5 9(60Hz) Variable displacement 750 12.3 30
7.5(50Hz) 200
(No load)  

 

 

NIRECO VIỆT NAM

 

 

1. Giới thiệu Servoguide Mark-Ⅳ M-Series Nireco

The Servoguide MK-IV is a new type of hydraulic controller which embodies our long experience and technology in the field of web control.

Bộ điều khiển vị trí cạnh M220-AM Nireco | Servoguide Mark-Ⅳ M-Series Nireco

The Servoguide MK-IV.M is an electro-hydraulic EPC device. This is the most precise and responsive control method currently available. We also offer a full range of sensors for all applications and reliability needs, and hydraulic servo valves for all loads and operating speeds. Besides EPC, these components can be used in systems for LFC(Line Follow Control) and CPC(Center Position Control) and various servo mechanisms.

  • Servoguide Mark-Ⅳ M121-AM

Single standard
The Model M121-AM receives a signal from the web guide amplifier and converts it into a hydraulic control signal. One Servoguide MK-IV M-series controller is mounted in the hydraulic pump unit. The model is equipped with an AUTO / MAN selecting function, which enables the controller to be swiched from automatic to manual operation, and the reel stand to be moved right and left manually.

  • Servoguide Mark-Ⅳ M220-AM

Twin standard
Two Servoguide MK-IV M series controllers are mounted on one hydraulic pump unit in the M220 model, for economic and compact instrumentation when more than one EPC system such as a laminator line or a multi-stage guide roll is installed nearby.

  • Servoguide Mark-Ⅳ M721-AM

High-load controller
The Model M721-AM is a high-powered Servoguide for high loads and high speed lines.

  • Servoguide Mark-Ⅳ M550-AM

High pressure / High resolution-type controller
The Servoguide Unit Model M550-AM is a controller suitable for use with high-pressure, high-precision lines, using general-purpose industrial servo valves developed by Nireco as its control elements.

  • Servoguide Mark-Ⅳ M810-AM

High-load controller 
The Model M810-AM controller incorporates our industrial servo values (Powerguide), giving it greater power output and responsiveness than other models.

 

2. Đặc tính Servoguide Mark-Ⅳ M-Series Nireco

  • Compact and highly reliable.
  • Large operating force and high sensitivity and accuracy (control within±0.l mm according to installation conditions)
  • A variety of sensors are available according to the application.
  • The sensor, amplifier, controller, and actuator have high responses.
  • Non-contact detecting system.
  • Very easy installation and maintenance.
  • All variety of sensors are available according to the application.
  • The remote control head and/or the centering sensor further simplifies operation.(option)

 

 

The Servoguide MK-IV. M is composed of a sensor, amplifier, controller, work cylinder, and a guide roll or reel stand. This system can be applied to a wide range of objects with the various sensors available.

Bộ điều khiển vị trí cạnh M220-AM Nireco | Servoguide Mark-Ⅳ M-Series Nireco

 

3. Thông số kỹ thuật Servoguide Mark-Ⅳ M-Series Nireco

MODEL Type Max operating pressure  Pump capacity  Pump type Motor Output Max. operating force kN Max. operating speed 
Mpa L/min W Cylinder bore mm with no load mm/s 
        Cylinder bore mm
      50 80 50 80
M121-AM Single standard 1.5 4.2 Fix displacement 400 3 7.4 34 13
M220-AM Twin standard 1.3 9(60Hz) No load Variable 750 3 7.4 34 13
7.5(50Hz)
M721-AM High load 2.5 9(60Hz) No load Variable 750 12 30
7.5(50Hz)
M550-AM High pressure /  5 9(60Hz) No load Variable 1500 25 60
high resolution type 7.5(50Hz)
M810-AM High output type 5 12.5(60Hz) No load Variable 1500 25 60
10.5(50Hz)

 

Bình chọn sản phẩm:

LIÊN HỆ NGƯỜI BÁN

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

bth.akinapro03@gmail.com

https://nireco-vietnam.gianhangvn.com

0914 599 052

Sản phẩm xem thêm