Đồng hồ đo độ dày vật liệu SM-114 Teclock - Teclock Vietnam

(0 đánh giá)

Mã SP: 916050
Vui lòng gọi

Xuất xứ :Teclock

Nơi rao bán :Toàn quốc

Tình trạng :Mới 100%

Ngày cập nhật :04-01-2020 08:39:32

Đồng hồ đo độ dày vật liệu SM-114 Teclock - Teclock Vietnam

LIÊN HỆ VỚI NGƯỜI BÁN

TĂNG MINH PHÁT

602 điện biên phủ, p.22, Q.Bình Thạnh

0911175069

thanh.ntkvietnam@gmail.com

https://teclock-vietnam.gianhangvn.com

Ghi chú: GianHangVN không trực tiếp bán sản phẩm, vui lòng liên hệ trực tiếp với người bán bên trên.

Thickness Gauge

sm-114 teclock.jpg

Dial Indicator is used by being fitted to jig etc., while thickness gauge is held with our hand. Holding work piece between stylus and anvil, read the value directly. Contact point moves to upward when lifting lever is pressed down, and contact point returns to “zero” when it is released. As operation is easy, it can measure for a short period compared with micrometer. There are 2 kinds of Dial 0.01mm , 0.001mm for both analog and digital. The stroke depends on size of work piece and a model is available to measure maximum thickness up to 50mm. This can be used for various thickness measurement such as paper, hair, rubber plate metal tube small molded components.

  • Suitable for measuring thickness and diameter of metal, lens, rubber, plastic, paper, felt, hair, pearl etc. in actual dimension.
  • Ceramic contact point and anvil feature are superior for anti-abrasion and rust. In addition, there are steel FE type and AT type which rarely adheres with adhesion tape.
  • As to shape of contact point and anvil, there are standard type and other various kinds.
  • Measuring force of standard type is not more than 2.5N as final pressure, low measuring force type of which final pressure is about 0.4N (about 40gf) is also available.

 

Model Graduation
(mm)
Measuring  Range
(mm)
Accuracy
(µm)
Parallelism
(µm)
Dial Reading Measuring  Force
(N)
Contact Point Form
(mm)
Anvil Form
(mm)
Weight
(g)
SM-114 0.01 10 ±15 5 0-50-100 2.5 or less φ 10 Flat φ 10 Flat 270
SM-114LS 0.01 10 ±15 - 0-50-100 2.5 or less φ 3.2 Ball φ 10 Flat 270
SM-114LW 0.01 10 ±15 - 0-50-100 2.5 or less φ 3.2 Ball φ 3.2 Ball 270
SM-114P 0.01 10 ±15 5 0-0.5-1 2.5 or less φ 10 Flat φ 10 Flat 270
SM-124 0.01 20 ±20 5 0-50-100 3.5 or less φ 10 Flat φ 10 Flat 270
SM-124LS 0.01 20 ±20 - 0-50-100 3.5 or less φ 3.2 Ball φ 10 Flat 270
SM-124LW 0.01 20 ±20 - 0-50-100 3.5 or less φ 3.2 Ball φ 3.2 Ball 270
SM-125 0.01 20 ±20 5 0-50-100 3.5 or less φ 10 Flat φ 10 Flat 440
SM-125LS 0.01 20 ±20 - 0-50-100 3.5 or less φ 3.2 Ball φ 10 Flat 440
SM-125LW 0.01 20 ±20 - 0-50-100 3.5 or less φ 3.2 Ball φ 3.2 Ball 440
Bình chọn sản phẩm:

LIÊN HỆ NGƯỜI BÁN

TĂNG MINH PHÁT

602 điện biên phủ, p.22, Q.Bình Thạnh

thanh.ntkvietnam@gmail.com

https://teclock-vietnam.gianhangvn.com

0911175069

Sản phẩm xem thêm