Force Sensors - Cảm biến lực - FMS vietnam - C203/ CA203/ F202/ FA202/

(1 đánh giá)

Mã SP: 02
Vui lòng gọi

Xuất xứ :FMS

Nơi rao bán :Toàn quốc

Tình trạng :Mới 100%

Ngày cập nhật :30-07-2019 21:59:03

Bảo hành :12 tháng

Tension Control: Duy trì sự căng thẳng thường xuyên với FMS sản phẩm Sơn, in ấn và nhiều ngành sản xuất khác đòi hỏi sự căng thẳng tài liệu liên tục. Với các giải pháp hiện tại ổ đĩa, công nghệ cảm biến, hệ thống xe buýt và bộ khuếch đại điều khiển lực căng đã trở thành nhà nước của nghệ thuật trong việc chuyển đổi dòng, kim loại, giấy và dây sản xuất và chế biến. Ngày nay, sự căng thẳng đo tải các tế bào là một phần của các thiết bị tiêu chuẩn trong hoạt động dây chuyền sản xuất

LIÊN HỆ VỚI NGƯỜI BÁN

CÔNG TY TNHH THƯƠNG MẠI DỊCH VỤ ANH NGHI SƠN

D3, KDC Miếu Nổi, Đường Đinh Tiên Hoàng, Q. Bình Thạnh, Tp. HCM

0932 740 637

thegioiansvietnam@gmail.com

https://tbdoluccang.gianhangvn.com

Ghi chú: GianHangVN không trực tiếp bán sản phẩm, vui lòng liên hệ trực tiếp với người bán bên trên.

ANS Việt Nam là công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng
“Thiết bị điện, Điện công nghiệp, Điện tự động”

QUÍ KHÁCH CÓ NHU CẦU VUI LÒNG LIÊN HỆ:

HOTLINE: 0916551124
MAIL: NGOCDUYEN.ANS@ANSVIETNAM.COM
Web: tudonghoaans.com

 

ANS Việt Nam xin hân hạnh cung cấp cho Quý khách hàng sản phẩm mà chúng tôi là đại lý phân phối chính thức:

Force Measuring Sensors (Load Cells) for Web Tension Control

All FMS force measuring sensors are characterised by its highest overload protection and its designated accuracy. It is achieved by a mechanical hardstop and four foil-type strain gauges in a full wheatstone bridge configuration. The red point on the outside of the sensor indicates the positive measuring direction.
Most FMS force measuring sensors are also available as vacuum sensors.

LMGZ Force Measuring Bearing

The LMGZ series tension sensors offer the highest accuracy, reliability, and durability in the industry. The ultra flat sensor can be used in the most stringent space conditions.

Features Advantages
20 times overload protection No recalibration required
Accuracy class 0.3% Highest precision
50:1 force measuring range Wide measuring capability at high resolution
Nominal forces from 33 to 25000 N Sizes available for every application
Stainless steel construction Corrosion resistant

A203 Series Force Measuring Sensors

The A203-Series Force Measuring Sensors is for use in live shaft roller applications. The straightforward mounting concept of the A 203 sensors saves time and money. The installation to the machine side frame is simply accomplished with only using a single mounting screw.

Features Advantages
Easy installation via a central screw Adaptable in machines with difficult mounting conditions
Accuracy Class 0.5% Highest accuracy even at low loads
Nominal Forces 50, 125, 250, 500 and 1000 N Covers low and medium application range
Sensor Body of High Quality Aluminium Sturdy, durable product with long term stability (over load protection 1x Fn).

C203 Force Measuring Sensor

The dual flexion beam sensors of the C203 series set new benchmarks with regards to precision, reliability and economic efficiency.

Features Advantages
10 times overload protection No re-calibration required
20:1 force measuring range Wide measuring capability at high resolution
Nominal forces 50, 125, 250, 500 and 1000 N Covers a wide application range
Stainless steel sensor, Aluminum Cover Corrosion resistant, ultra durable

CA203 Force Measuring Sensor

The CA203 series is made for dead shaft applications. FMS dual flexion beam technology sensors set new benchmarks with regards to precision, reliability and economic efficiency.

Features Advantages
10 times overload protection No re-calibration required
20:1 force measuring range Accuracy class 0.5%
Nominal forces 50, 125, 250, 500, 1000, 1500 N Covers a wide application range
Stainless steel sensor, Aluminum Cover Corrosion resistant, ultra durable

F202 Force Measuring Sensor

The F202 Series Force Measuring Sensor is for use in live shaft roller applications where limited space is available. Their slim design provides a new option for accurate web tension measurement on machines where wider sensor designs simply did not fit. The sensor is easily mounted to the machine side frame with two shoulder bolts.

Features Advantages
Ultra Slim Design Adaptable in machines with difficult space conditions
30:1 Force Measuring Range Accurate measurements also at low loads
Accuracy Class 0.3% Highly linear measuring characteristic
Nominal Forces 50, 125, 250, 500 N Covers a wide application range
Stainless Steel Sensor, Aluminium Cover Corrosion resistant, ultra durable

FA202 Force Measuring Sensor with Dead Shaft Adapter

The FA202 Series Force Measuring Sensor is for use in dead shaft roller applications where limited space is available. The slim sensor design provides a new option for accurate web tension measurement on machines where wider sensor designs simply will not fit. The range of adapters covers the most popular shaft diameters.

Features Advantages
Ultra Slim Design Adaptable in machines with difficult space conditions
30:1 Force Measuring Range Accurate measurements also at low loads
Accuracy Class 0.3% Highly linear measuring characteristic
Nominal Forces 50, 125, 250, 500 N Covers a wide application range
Stainless Steel Sensor, Aluminium Cover Corrosion resistant, ultra durable

LMGZ.D Double Range Force Measuring Bearing

The LMGZ.D double range force measuring bearing sensors offer the highest accuracy, reliability, and durability in the industry. Especially when processing widest kinds and widths of materials.

Features Advantages
Measurable tension range 1:200 Widest measuring range available at high resolution
Overload protection 10 times the rated high the nominal force Recalibration is not required
Nominal forces from 33 - 6000 N Sizes available for every application
Stainless steel sensor Corrosion resistant

CZ205 Force Measuring Journal

The force measuring journals of the CZ 205 Series undertake the tension measurement in all kinds of continuous material processing applications.

Features Advantages
10 times overload protection No recalibration required
20 : 1 force measuring range Wide measuring range at high resolution
Nominal forces 50, 125, 250, 500, 1000, 1500 N Covers a wide application range
Stainless steel sensor, aluminium cover Corrosion resistant, ultra durable

UMGZ Force Measuring Bearing Block

The UMGZ force measuring blocks are ruggedly constructed, accurate and very reliable. They are used in normal and dry ambient conditions.

Features Advantages
Overload protection, 10-times nominal measuring force No recalibration required
Nominal forces of 0,5-100 kN Nominal forces suitable for all uses
Stainless steel force sensors Permanently corrosion-resistant

UMGZ.P Force Measuring Block

UMGZ.P force measuring blocks are a first-rate substitute for the discontinued Philips products PR 9951/52. They are with regards to the outline dimensions and mounting holes 1-to-1 compatible with the former Philips blocks. UMGZ.P blocks feature all typical characteristics of FMS products like simplicity, quality and enduring precision. They are the ideal sensors for a retrofit.

Features Advantages
Drop-in replacement for Philips PR 9951/52 measuring blocks Easy exchange without machine frame modifications
Overload protection 10 times nominal force No recalibration required
Accuracy class 0.3% Highly linear measuring characteristic
Nominal force ratings from 1 kN (225 lbf) to 10 kN (2248 lbf) Forces suitable for many applications
Stainless steel force sensor Corrosion resistant, ultra durable

SMGZ Force Measuring Bearing Block

SMGZ force sensors are used in difficult ambient conditions, e.g. hydrocarbon media like, rolling oils or in high temperatures environments. They can be used in virtually any metal strip process.

Features Advantages
Overload protection, 10-times nominal measuring force No recalibration required
Nominal forces of 2-100 kN Nominal forces suitable for all uses
Stainless steel force sensors Permanently corrosion-resistant
Protection class IP67 High level of operational safety

PMGZ Force Measuring Bearing Block

These force sensors are perfect for difficult ambient conditions, e.g. cooling water, wet paperpulp, high temperatures, humidity, acids and bases. They can be used in virtually any wet environment.

Features Advantages
Overload protection, 10-times nominal measuring force No recalibration required
Nominal forces of 2-100 kN Nominal forces suitable for all uses
Stainless steel force sensors Permanently corrosion-resistant
High temoerature up to 120°C Covers high-temperature applications

IMGZ Series Force Measuring Roller

The measuring sensors are integrated in the roller and measure the forces which are acting on the roller in an accuratly and effective manner.

Features Advantages
Sensor integrated in roller with only one electrical connection Easy mounting and connection
10 times overload protection Recalibration is not required
Nominal forces from 200 - 3000 N Sizes available for every application
50:1 force measuring range Wide measuring capability
Stainless steel sensor Corrosion resistant, ultra-durable

RMGZ900 Force Measuring Roller

The RMGZ900 series force measuring rollers are designed as self contained cantilever mount sensors that minimise machine space requirements in continuous material processing applications.

Features Advantages
Roller length up to 900mm Wide variety of sizes for the middle material range
10 times overload protection Recalibration is not required
20:1 force measuring range Wide measuring capability
Nominal forces from 50 - 1000 N Large sensor choice for the medium measuring range
Stainless steel sensor, anodised roller Corrosion resistant, ultra-durable

RMGZ900mini Force Measuring Roller

The RMGZ900mini series sensors are designed as self contained cantilever mount sensors that minimise machine space requirements in narrow material processing applications.

Features Advantages
Roller length up to 200mm Wide variety of types and sizes available
10 times overload protection Very stable - recalibration is not required
20:1 force measuring range Wide measuring capability at high resolution
Nominal forces from 20 to 200 N Optimized for the low measuring range
Stainless steel sensor, anodised roller Corrosion resistant, ultra-durable

RMGZ100B Force Measuring Roller

FMS force measuring rollers of the RMGZ100B series are used to measure the tension in ropes, cables, wires and narrow web materials.

Features Advantages
10 times overload protection No recalibration required
20:1 force measuring range Wide measuring capability
Nominal forces from 3 -3 00 N Covers perfectly the low application
Lifetime lubricated ball bearings No maintenance necessary

RMGZ200 Force Measuring Roller

The Force Measuring Rollers of the RMGZ200-series are used to measure the material tension in wire and cable producing machinery such as planetary cage, tubular and rigid frame stranding machines as well as in bunchers and twisters. The rollers comprise a device for proper alignment and adjustment of the force measuring direction. This prevents centrifugal forces influencing the measuring results.

Features Advantages
Engineered for rotating applications Excellent performance even at high revolutions and low strand tensions
Exact alignment of sensor position No influence of centrifugal forces on measurement
Nominal forces from 6 - 300 N Covers low and medium application range
Maintenance-free bearings No lubrication required

RMGZ300A Force Measuring Roller

The RMGZ300A Series force measuring roller is used to measure the tension in wires, cables and similar materials. This dedicated measuring roller family was developed to work in rotating applications with high revolutions.

Features Advantages
Engineered to work in high revolution applications Resistant against Centrifugal and Coriolis forces
10 times overload protection No recalibration required
Sheave support by single or double bearing High measuring accuracy even with heavy sheaves and high strand tensions
Nominal forces from 50 – 1000 N Sizes available for every application

RMGZ400 / 600 Force Measuring Roller

FMS force measuring rollers of the RMGZ400/600 series are used to measure the tension in ropes, cables, wires and narrow web materials.

Features Advantages
10 times overload protection Recalibration is not required
50:1 force measuring range Wide material processing and measuring capability
Nominal forces from 60 - 4000 N Ideal for the mid range tension range
Stainless steel sensor body Durable and corrosion resistant
Lifetime lubricated ball bearings No maintenance necessary

RMGZ800A Force Measuring Roller

FMS force measuring rollers of the RMGZ800A series are used to measure the tension in ropes, cables, wires and narrow web materials - made for higher forces and stability

Features Advantages
10 times overload protection Recalibration is not required
50:1 force measuring range Wide material processing and measuring capability
Nominal forces from 100 - 8000 N Covers wide application range
Lifetime lubricated ball bearings No maintenance necessary

CR Force Measuring Roller

The force measuring rollers of the CR 208, CR 210 and CR 212 Series are ideal devises to measure tensions in wires, cables and narrow flat materials.

Features Advantages
10 times overload protection No recalibration required
20:1 force measuring range Wide measuring range at high resolution
Nominal forces 50, 125, 250, 500, 1000, 1500 N Covers a wide application range
Stainless steel sensor, Aluminium Cover Corrosion resistant, ultra durable

DMGZ Load Cell

The DMGZ300 series load cells measure force in the direction of the center axis of the sensor.

Features Advantages
Compact design with 10 times overload protection Adaptable to difficult space conditions
20:1 force measuring range Wide measuring capability
Nominal forces from 0.3 - 50kN Covers a wide application range
Stainless steel sensor, aluminium sleeve Corrosion resistant, ultra-durable

AMGZ Series Force Measuring Journal

The AMGZ Series sensors are designed as dead shaft sensors to allow easy roller change in continuous material processing applications.

Features Advantages
10 times overload protection No recalibration required
20:1 force measuring range Wide measuring capability
Nominal forces from 100 - 2250 N Sizes available for every application
Stainless steel sensor, single bolt mounting Corrosion resistant, ultra-durable, user friendly

ZMGZ Force Measuring Journal

The ZMGZ series force measuring journals are used to measure the tension in continuous material processing. Force measuring journals are utilized with rollers that have an internal bearing. A bearing mounts to the bearing seat of the load cell and fits inside the roller.

Features Advantages
10 times overload protection No recalibration required
20:1 force measuring range Wide measuring capability
Nominal forces from 100 - 3000 N Sizes available for every application
Stainless steel sensor Corrosion resistant, ultra durable

JG205 Force Measuring Journal

JG205 is ideally suited to work under the most stringent environmental requirements, where the exposure to aggressive chemical additives, high temperatures and humidity are factors. Thanks to its special compact and durable design these sensors are effectively used in textile applications.

Features Advantages
Protection Class IP68 Engineered to work under extreme conditions
10 times overload protection No recalibration required
Compact and sturdy design Requires little installation space
Nominal forces from 125 - 1500 N Sizes available for every application
Completely made of stainless steel Corrosion resistant, ultra durable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bình chọn sản phẩm:

LIÊN HỆ NGƯỜI BÁN

CÔNG TY TNHH THƯƠNG MẠI DỊCH VỤ ANH NGHI SƠN

D3, KDC Miếu Nổi, Đường Đinh Tiên Hoàng, Q. Bình Thạnh, Tp. HCM

thegioiansvietnam@gmail.com

https://tbdoluccang.gianhangvn.com

0932 740 637

Sản phẩm xem thêm