Đo nội trở Ắc quy BT3562 Hioki

(0 đánh giá)

Mã SP: BT3562
Vui lòng gọi

Xuất xứ :Hioki- Nhật Bản

Nơi rao bán :Toàn quốc

Tình trạng :Mới 100%

Ngày cập nhật :27-06-2020 11:18:40

Bảo hành :12 tháng

Các tính năng chính • Đo điện áp của bộ pin lên tới 60 V (BT3562) • Thử nghiệm dây chuyền sản xuất các bộ pin điện áp cao và các mô-đun pin • Thử nghiệm tế bào lớn (sức đề kháng thấp) • Lựa chọn giao diện PC cho hoạt động từ xa đầy đủ Lưu ý: Các giá trị ngưỡng so sánh phụ thuộc vào nhà sản xuất pin, loại và dung lượng và những giá trị này phải được thiết lập bởi người dùng.

LIÊN HỆ VỚI NGƯỜI BÁN

SOLUTION - TEST EQUIPMENT / CALIBRATION - SERVICE

Hai Bà Trưng - Hà Nội

090.200.6658

Hiokivietnam.hn6@gmail.com

http://hiokivietnam.com.vn

Ghi chú: GianHangVN không trực tiếp bán sản phẩm, vui lòng liên hệ trực tiếp với người bán bên trên.

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Max. applied measurement voltage ± 60 VDC rated input voltage
± 70 VDC Max. rated voltage to earth
Resistance measurement ranges 3 mΩ (Max. display 3.1000 mΩ, resolution 0.1 μΩ) to 3000 Ω (Max. display 3100.0 Ω, resolution 100 mΩ), 7 ranges
Accuracy: 30 mΩ to 3000 Ω ranges, ± 0.5% rdg. ± 5 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM)
3 mΩ range, ± 0.5% rdg. ± 10 dgt. (Add ± 30 dgt. for EX.FAST, or ± 10 dgt. for FAST, or ± 5 dgt. for MEDIUM) 
Testing source frequency: 1 kHz ± 0.2 Hz, testing current: 100 mA (3 mΩ range) to 10 μA (3000 Ω range)
Open-circuit Voltage: 25 V peak (3/30 mΩ ranges), 7 V peak (300 mΩ range), 4 V peak (3 Ω to 3000 Ω ranges)
Voltage measurement ranges 6 VDC (resolution 10 μV) to 60 VDC (resolution 100 μV), 2 ranges
  Accuracy: ± 0.01% rdg. ± 3 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM)
Display 31000 full digits (resistance), 600000 full digits (voltage), LED
Sampling rate Four steps, 4 ms (Extra-FAST), 12 ms (FAST), 35 ms (Medium), 150 ms (Slow) 
(Typ., sampling time depends on supply frequency settings and function.)
Measurement time Response time + sampling rate, approx. 10 ms for measurements
(Response time depends on reference values and the measurement object.)
Comparator functions Judgment result: Hi/IN/Lo (resistance and voltage judged independently)
Setting: Upper and lower limit, Deviation (%) from reference value
Logical ANDed result: PASS/FAIL, calculates the logical AND of resistance and voltage judgment results.
Result display, beeper, or external I/O output, Open-collector (35 V, 50 mA DC max.)
Analog output Measured resistance (displayed value, from 0 to 3.1 V DC, -01 suffix models only)
Interfaces External I/O, RS-232C, Printer (RS-232C), GP-IB (-01 suffix models only)
Power supply 100 to 240 VAC, 50/60 Hz, 30 VA max.
Dimensions and mass 215 mm (8.46 in) W × 80 mm (3.15 in) H × 295 mm (11.61 in) D, 2.4 kg (84.7 oz)
Accessories Instruction manual ×1, Power cord ×1

Options

Measurement leads A

(for measuring high voltage batteries)

About probe length
A: From junction to probe
B: Probe part
L: Whole length

TIP PIN 9772-90

To replace the tip on the Pin type lead 9772, L2100/L2110, (one piece)

 

PIN TYPE LEAD L2100

A:300 mm (11.81 in), B:172 mm (6.77 in), L:1400 mm (4.59 ft), for high voltage battery measurements, 1000 V DC max.

Option

Can not be used for PIN TYPE LEAD 9770, 9771

0 ADJ BOARD Z5038

For L2110, L2020, 9465-10, 9772

Measurement Leads B (for measuring batteries up to 60 V)

1.8 mm dia. single-axis type for measuring small electrodes

About probe length
A: From junction to probe
B: Probe part
L: Whole length

PIN TYPE LEAD 9770

A:260 mm (10.24 in), B:140 mm (5.51 in), L:850 mm (2.79 ft), 70V DC

Measurement Leads B (for measuring batteries up to 60 V)

0.2 mm parallel pyramid-type pins for measuring at thru holes and sub-millimeter objects

About probe length
A: From junction to probe
B: Probe part
L: Whole length

PIN TYPE LEAD 9771

A:260 mm (10.24 in), B:138 mm (5.43 in), L:850 mm (2.79 ft), 70V DC

Measurement Leads C (for measuring batteries up to 60 V)

About probe length
A: From junction to probe
B: Probe part
L: Whole length

CLIP TYPE LEAD L2107

A: 130 mm (5.12 in), B:84 mm (3.31 in), L:1.1 m (3.61 ft), 70 V DC

 

FOUR TERMINAL LEAD 9453

A:280 mm (11.02 in), B:118 mm (4.65 in), L:1360 mm (4.46 ft), 60V DC

 

LARGE CLIP TYPE LEAD 9467

A: 300 mm (11.81 in), B: 131 mm (5.16 in), L: 1310 mm (4.30 ft), tip φ 29 mm (1.14 in), 50 V DC

PC communication

GP-IB CONNECTOR CABLE 9151-02

2 m (6.56 ft) length

 

RS-232C CABLE 9637

9 pin - 9 pin, cross, 1.8 m (5.91 ft) length

Compatible products

Last update: June 15, 2018

SWITCH MAINFRAME SW1001

• Pair with a measuring instrument to achieve multi-channel capabilities • Max. 66 channels (2-wire) to max. 18 channels (4-terminal pair)

Learn more

 

SWITCH MAINFRAME SW1002

• Pair with a measuring instrument to achieve multi-channel capabilities • Max. 264 channels (2-wire) to max. 72 channels (4-terminal pair)

Learn more

Bình chọn sản phẩm:

LIÊN HỆ NGƯỜI BÁN

SOLUTION - TEST EQUIPMENT / CALIBRATION - SERVICE

Hai Bà Trưng - Hà Nội

Hiokivietnam.hn6@gmail.com

http://hiokivietnam.com.vn

090.200.6658

Sản phẩm xem thêm