Kikusui TOS5301 | Máy đó trở kháng Kikusui TOS5301 | Hipot and Insulation Resistance Tester Kikusui

- Công ty TNHH TM DV GREENTECH là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp,.... Bên cạnh đó chúng tôi là nhà thực hiện các giải pháp tích hợp trong công nghiêp, dân dụng, xây dựng,... Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa hiện nay

Liên hệ cho chúng tôi để CÓ thông tin mà Quý khách CẦN.

< SALE & TECHNICAL SUPPORT >

< PROJECT SUPPORT >
Email : sales@greentechvn.com

-------------------------------------------------------------------

-------------------------------------------------------------------

Mô tả:

The "TOS5300 Series" is a series of test instruments used in Hipot (withstanding voltage) tests and insulation resistance tests, two of the four tests regarded as necessary for ensuring the safety of electrical products. With an output of 5 kV/100 mA (AC) and 6 kV/10 mA (DC), the series can be used in Hipot (withstanding voltage) & insulation resistance testing of electronic equipment and electronic parts, based on the requirements of IEC, EN, UL, VDE, JIS, and other international safety standards and the Electrical Appliance and Material Safety Law. Also, the test voltage stability is improved with the adoption of a newly developed switching amplifier. Since the output voltage can be kept constant even when the AC line voltage or frequency changes, consistent testing can be performed, even when the power supply environment is in an unstable region.
The TOS5300 is also equipped with a number of features that are capable of meeting a variety of test needs. It is a new low-cost standard model that provides thorough operability, reliability and safety.

Features

Reducing the tact time
Increasing the productivity!
Capable of setting the test time from 0.1s
Highly stable
Newly developed, high-efficiency PWM switching amplifier !
Providing a stable output of high voltage without being affected by AC line variation. Ensure the user to perform highly reliable testing with confidence, even in regions with large voltage variations. (Input voltage fluctuation rate: ±0.3%)
Rise/Fall Time control function of the applied voltage
Equipped with a Rise time/Fall time control function.
Prevents from an excessive stress applied to the EUT or for standard tests.
Pursuing usability and safety
All new design of the control panel and output terminals!
Eliminates the projected components of output terminals, and equips with a new type of the LOW terminal. Pursuing the improvement of safety and a convenience in production line, such as providing the protection cover for the front panel.
The utility software: Data Acquisition for TOS5300 (Freeware)
Data Acquisition for TOS5300 is a software product that lets you collect and manage test results generated by our TOS5300 Series Hipot and Insulation Resistance Testers. Also, Data Acquisition for TOS5300 allows you to save, search, and print data with ease. What's more, you can execute or stop the test through a simple operation using a PC.
[OS] Windows7/Vista/XP
Supporting the World-wide input voltage
Usable globally !
Usable in any country without changing the input power supply.
Selectable output frequency !
The instrument not rely on the input power environment. Supplying the stable test voltage with 50/60 Hz frequencies.
Lightweight and Compact design
Increasing your work efficiency!
Weighs Approx. 15 kg, 40% lighter than conventional models.
(Compared to TOS5300 and TOS8870A)

Lineup

Model	Specification
TOS5300	The PWM amp system provides highly-stable output, 5kV/100mA (500VA) AC Hipot (withstanding voltage) test, High-precision measurement ±1.5% of reading (with voltmeter 500V or higher, Ammeter 1mA or higher), Rise time/Fall time control, Key lock function and Protection cover for key operation, Equipped with USB interface > Manual...
TOS5301	The PWM amp system provides highly-stable output, 5kV/100mA (500VA) AC Hipot (withstanding voltage) test, 6kV/maximum output 50W DC Hipot (withstanding voltage) tester (TOS5301), High-precision measurement ±1.5% of reading (with voltmeter 500V or higher, Ammeter 1mA or higher), Rise time/Fall time control, Key lock function and Protection cover for key operation, Equipped with USB interface > Manual...
TOS5302	The PWM amp system provides highly-stable output, 5kV/100mA (500VA) AC Hipot (withstanding voltage) test, 25V-1000V (7 steps), 500V or greater, up to 5.00GΩ Insulation Resistance test, High-precision measurement ±1.5% of reading (with voltmeter 500V or higher, Ammeter 1mA or higher), Rise time/Fall time control, Key lock function and Protection cover for key operation, Equipped with USB interface > Manual...

Model

Specification

TOS5300

The PWM amp system provides highly-stable output, 5kV/100mA (500VA) AC Hipot (withstanding voltage) test, High-precision measurement ±1.5% of reading (with voltmeter 500V or higher, Ammeter 1mA or higher), Rise time/Fall time control, Key lock function and Protection cover for key operation, Equipped with USB interface > Manual...

TOS5301

The PWM amp system provides highly-stable output, 5kV/100mA (500VA) AC Hipot (withstanding voltage) test, 6kV/maximum output 50W DC Hipot (withstanding voltage) tester (TOS5301), High-precision measurement ±1.5% of reading (with voltmeter 500V or higher, Ammeter 1mA or higher), Rise time/Fall time control, Key lock function and Protection cover for key operation, Equipped with USB interface

> Manual...

TOS5302

The PWM amp system provides highly-stable output, 5kV/100mA (500VA) AC Hipot (withstanding voltage) test, 25V-1000V (7 steps), 500V or greater, up to 5.00GΩ Insulation Resistance test, High-precision measurement ±1.5% of reading (with voltmeter 500V or higher, Ammeter 1mA or higher), Rise time/Fall time control, Key lock function and Protection cover for key operation, Equipped with USB interface

> Manual...

Options (Related products)

TL31-TOS

Option(s) for Electrical Safety Testers
High-voltage test lead for TOS53XX, 1.5m (5kV Max.)

TL32-TOS

Option(s) for Electrical Safety Testers
High-voltage test lead for TOS53XX, 3m (5kV Max.)

HP01A-TOS

Option(s) for Electrical Safety Testers
High-voltage test probe, Cable Length 1.8m (AC4kV,DC5kV Max.) , Note: The optional Adapter DD-5P/9P (DIN to Mini DIN) is required for the connection with TOS53XX

HP02A-TOS

Option(s) for Electrical Safety Testers
High-voltage test probe, Cable Length 3.5m (AC4kV,DC5kV Max.), Note: The optional Adapter DD-5P/9P (DIN to Mini DIN) is required for the connection with TOS53XX

RC01-TOS

Option(s) for Electrical Safety Testers
Remote control box (For one hand operation, cable length:1.5m) Note1: The optional Adapter DD-5P/6P (DIN to Mini DIN) is required for the connection with TOS7200, Note2: The optional Adapter DD-5P/9P (DIN to Mini DIN) is required for the connection with TOS53XX

RC02-TOS

Option(s) for Electrical Safety Testers
Remote control box (For both-hand operation, cable length:1.5m) Note1: The optional Adapter DD-5P/6P (DIN to Mini DIN) is required for the connection with TOS7200, Note2: The optional Adapter DD-5P/9P (DIN to Mini DIN) is required for the connection with TOS53XX

DD-5P/9P

Option(s) for Electrical Safety Testers
Conversion cable(DIN to Mini DIN) for connecting the remote control box (RC01-TOS or RC02-TOS) or high-voltage test probe (HP01A-TOS or HP02A-TOS ) with TOS53XX

TU01-TOS

Option(s) for Electrical Safety Testers
The TU01-TOS is a terminal unit that converts the 25 pin SIGNAL I/O connector of the Kikusui TOS5300/ 5301/ 5302 Withstanding Voltage Tester to the 14 pin SIGNAL I/O connector of the TOS5050A/ 5051A. You can insert this unit between a controller and a TOS5300/ 5301/ 5302 to perform the same external control that you can perform on the TOS5050A/ 5051A.