(Phải dùng kết hợp với máy hấp sấy TD610)
Lab Coater is the optimum combination of dryer and laboratory coating table. Various kinds of material samples are coated in the same run by the coating device and heat-treated in the dryer.
The coating is applied either by a floating, roller or rubber blanket knife. Multiple coatings which do not require reloading are also possible.
Specifications
- Coating area 300 x 400mm
- Coating thickness 0 ~ 5mm,
- Resolution ratio 0.01mm
- Electic coating, coating speed 0 ~ 4m/min
- Removable pin frame, the pin frame can be put into the oven / dryer (TD610) with the textile when coated
Power
| 220 V | 50/60 Hz | 40W |
Weight
| 180 Kg |
Dimensions
| 840 x 680 x 500 mm (L x W x H) |
