Item Specifications
Part Number MDDHT5540E
Details A5E series
Position control type
without the safety function
Family Name MINAS A5
Series A5E series
Type Position control type
Frame D-Frame
Frequency response (kHz) 2.3
Control method Position control
Safety Function without
Power device Max. current rating 50A
Current detector current rating 40A
Supply voltage Single/3-phase 200 V
I/F Classification of type Pulse train only
Dimensions (W) (Unit: mm) 86
Dimensions (H) (Unit: mm) 150
Dimensions (D) (Unit: mm) 170
Mass (kg) 1.8
Environment For more details, please refer to the instruction manual.

 

Basic Specifications

Item Specifications
Input power: Main circuit Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz
Input power: Control circuit Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz
Encoder feedback 20-bit (1048576 resolution) incremental encoder, 5-wire serial
Parallel I/O connector:
Control signal Input		 General purpose 10 inputs
The function of general-purpose input is selected by parameters.
Parallel I/O connector:
Control signal Output		 General purpose 6 output
The function of general-purpose output is selected by parameters.
Parallel I/O connector:
Analog signal Output		 2 outputs (Analog monitor: 2 output)
Parallel I/O connector:
Pulse signal Input		 2 inputs (Photo-coupler input, Line receiver input)
Parallel I/O connector:
Pulse signal Output		 4 outputs (Line driver: 3 output, open collector: 1 output)
Communication function USB
Communication function: USB USB interface to connect to computers for parameter setting or status monitoring.
Regeneration Built-in regenerative resistor (external resistor is also enabled.)
Control mode Switching among the following 3 mode is enabled,
(1) Position control, (2) Internal velocity command, (3) Position/Internal velocity command

 

LH: 0938070068

Email: dung0938070068@gmail.com