Ordering details | |
Product type description | BNS 120-11Z |
Article number | 101128296 |
EAN code | 4030661050850 |
eCl@ss | 27-27-24-02 |
Approval | |
Approval | BG USA/CAN |
Classification | |
Standards | EN ISO 13849-1 |
B10d Opener/Normally open contact (NC/NO) | 25.000.000 |
- notice | at max. 20% contact load |
Mission time | 20 Years |
notice | |
Global Properties | |
Product name | BNS 120 |
Standards | IEC 60947-5-3, BG-GS-ET-14 |
Compliance with the Directives (Y/N) | Yes |
Materials | |
- Material of the housings | Plastic, glass-fibre reinforced thermoplastic |
- Material of the cable mantle | PVC |
Weight | 45 g |
Coding available (Y/N) | No |
Monitoring function of downstream devices (Y/N) | No |
Prerequisite evaluation unit | |
Recommended safety-monitoring module | |
Recommended actuator | BP 6, BP 8, BP 10, BP 15 SS |
Mechanical data | |
Design of electrical connection | Cable |
Cable length | 1 m |
Conductors | 4 x 0,25 mm² |
AWG-Number | 23 |
mechanical installation conditions | quasi-flush |
Active area | |
Ensured switch distance ON Sao | 10 mm / 20 mm |
- Actuating magnet BP 8 | 10 mm |
- Actuating magnet BP 6 | 10 mm |
- Actuating magnet BP 15 SS | 20 mm |
- Actuating magnet BP 10 | 20 mm |
Ensured switch distance OFF Sar | 22 mm / 32 mm |
- Actuating magnet BP 15 SS | 32 mm |
- Actuating magnet BP 6 | 22 mm |
- Actuating magnet BP 8 | 22 mm |
- Actuating magnet BP 10 | 32 mm |
Type of actuation | Magnet |
Direction of motion | head-on with regard to the active surface |
restistance to shock | 30 g / 11 ms |
Resistance to vibration | 10 … 55 Hz, Amplitude 1 mm |
Ambient conditions | |
Ambient temperature | |
- Min. environmental temperature | −25 °C |
- Max. environmental temperature | +70 °C |
Storage and transport temperature | |
- Min. Storage and transport temperature | −25 °C |
- Max. Storage and transport temperature | +70 °C |
Protection class | IP67 |
Electrical data | |
Integrated Safety monitoring module available (Y/N) | No |
Cross circuit/short circuit recognition possible (Y/N) | Yes |
Voltage type | VAC/DC |
Switch frequency | max. 5 Hz |
Switching voltage | max. 100 VAC/DC |
Switching current | max. 250 mA |
Switching capacity | max. 5 W |
Outputs | |
Design of control output | |
Number of shutters | 1 piece |
Number of openers | 1 piece |
Design of output signal switching device | |
Electrical data - Safety outputs | |
Number of secure semi-conductor outputs | 0 piece |
Number of secure outputs with contact | 2 piece |
Electrical data - Diagnostic output | |
Number of semi-conductor outputs with signaling function | 0 piece |
Number of outputs with signaling function that already have a contact | 0 piece |
LED switching conditions display | |
LED switching conditions display (Y/N) | No |
ATEX | |
Explosion protection categories for gases | None |
Explosion protected category for dusts | None |
Dimensions | |
Dimensions of the sensor | |
- Length of sensor | 38.5 mm |
- Diameter of sensor | M12 |
notice | |
Contact symbols shown for the closed condition of the guard device. | |
The safety sensor must be mounted in such a way that actuation with another magnet is impossible (concealed mounting according to EN 1088) | |
Included in delivery | |
Actuators must be ordered separately. | |
Diagram | |
Note Diagram positive break NC contact active no active Normally-open contact Normally-closed contact | |
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 WuppertalThe data and values have been checked throroughly. Technical modifications and errors excepted.Generiert am 03.08.2016 - 08:05:14h Kasbase 3.2.4.F.64I |