Technical data - electrical ratings | |
---|---|
Interference immunity | EN 61000-6-2 |
Emitted interference | EN 61000-6-3 |
Approval | CE |
Technical data - electrical ratings (SSI) | |
Voltage supply | 4.5...30 VDC |
Interface | SSI |
Function | Singleturn |
Steps per turn | ≤131072 / 17 bit |
Sensing method | Magnetic |
Code | Gray or binary |
Code sequence | CW default |
Additional outputs | Square-wave TTL (RS422)Square-wave universal HTL/TTL SinCos |
Interference immunity | EN 61000-6-2 |
Emitted interference | EN 61000-6-3 |
Technical data - electrical ratings (square-wave) | |
Voltage supply | 4.5...30 VDC |
Consumption w/o load | ≤300 mA |
Pulses per revolution | 1...524288 |
Phase shift | 90° ±10° |
Scan ratio | 40...60 % |
Sensing method | Magnetic |
Output frequency | ≤2 MHz |
Output signals | A+, A-, B+, B- |
Output stages | HTL TTL/RS422 |
Technical data - electrical ratings (SinCos) | |
Voltage supply | 4.5...30 VDC |
Consumption w/o load | ≤300 mA |
Sinewave cycles per turn | 1...32768 |
Phase shift | 90° ±5° |
Sensing method | Magnetic |
Output signals | A+, A-, B+, B- |
Output stages | SinCos 1 Vpp |
Difference of SinCos amplitude | ≤20 mV |
Harmonics typ. | -40 dB |
DC offset | ≤20 mV |
Bandwidth | 400 kHz (-3 dB) |
Technical data - mechanical design | |
Sensor head | FPGA signal processing |
Size (flange) | ø406.8 mm |
Shaft type | ø70...340 mm (through hollow shaft) |
Axial tolerance | ±1 mm (wheel/head) |
Radial tolerance | 0.1...0.5 mm (wheel/head) |
Protection DIN EN 60529 | IP 67 (head) IP 68 (wheel) |
Operating temperature | -20...+85 °C |
Operating speed | ≤2000 rpm |
Resistance | IEC 60068-2-6 Vibration 30 g, 55-2000 Hz IEC 60068-2-27 Shock 300 g, 2 ms |
Accuracy of magnetic measure | ±150 ″ |
Connection | Flange connector M23, 17-pin |
Data type | Design | Download | Size |
---|---|---|---|
Data sheet | MHAP 400 - HDmag | | | | 429 kb |
Assembly instructions | MHAP 400 - HDmag |
| 2,546 kb |
Certificates/licenses | Shock and vibration certificate MHAP | | | 639 kb |
Certificates/licenses | Protection certificate MHAP | | | 442 kb |
EU Declaration of Conformity | Encoders without ATEX |
| |
3D CAD data | MHAP400 B5 G180 / STEP |
| 145 kb |
3D CAD data | MHAP400 B5 G340 / STEP |
| 143 kb |